Jiangsu Changzhou inorganic zinc silicate primer steel structure special primer inorganic zinc rich primer manufacturer

Description :

　　Inorganic zinc silicate primer manufacturer workshop equipment primer steel structure anti-corrosion primer inorganic zinc rich primer

　　Main performance: corrosion resistance and cathodic protection; Excellent weather resistance, able to withstand long-term wind erosion; Outstanding oil and heat resistance. Can withstand high temperatures below 400 ℃ for a long time.

　　Maturity time: 0.5h at 23 ± 2 ℃; Usage period: 4h at 23 ± 2 ℃; Equipped with X-11 inorganic zinc rich coating diluent (see construction instructions for the amount added).

　　Painting method: 1. Air spraying, recommended nozzle diameter: 1.7-2.3mm, spraying pressure: 0.25-0.65MPa;

　　2. Airless spraying, recommended nozzle diameter: 0.4-0.5mm, spray pressure: 16MPa;

　　3. Brush coating.

　　Coating interval: 23 ± 2 ℃ for at least 24 hours

　　Tool cleaning: After cleaning with X-11 inorganic zinc rich coating diluent, the solvent is recovered.

　　Surface treatment: All surfaces to be coated should be clean, dry, and free of contamination,

　　The requirement is to achieve sandblasting rust removal Sa2.5 level or manual rust removal St3 level, with a roughness of 40-70 microns.

　　Suggestion requirement: Suggested number of coating layers and dry film thickness: One layer of airless spraying with a thickness of 65 μ m

AfterSalesService :

• Resist GTI