Guangdong Shaoguan High Brightness Polyurethane Enamel Acrylic Enamel Manufacturer with Complete Colors

Description :

　　Product Name: Polyurethane Primer/Polyurethane Topcoat/Polyurethane Varnish

　　Packaging: 18kg/drum

　　Color: Various colors. In addition, our factory can customize according to samples

　　Function: Rust prevention/anti-corrosion/coating/paint

　　Purpose: Suitable for painting and protecting various types of machinery, equipment, and iron castings.

　　Drying time: surface drying ≤ 1h; actual drying ≤ 24h

　　Construction reference:

　　1. Be sure to clean the surface of the object to be coated, removing oil stains, rust, oxide scales, etc.

　　2. If there are impurities in the paint, they must be filtered clean.

　　3. Brushing or air spraying are both acceptable. X-10 polyurethane diluent can be used to adjust viscosity, and alcohol, ammonia solvents, and nitro diluents should be avoided for dilution.

　　4. Before construction, the two components should be mixed according to the prescribed ratio, and the amount of mixing should not be too much at once. The prepared paint should be used up within 4 hours (23 ± 2 ℃) to prevent gelation.

　　5. Construction should not be carried out when the air humidity is greater than 85% or the substrate temperature is below the dew point by 3 ℃.

　　6. The paint can be dried at room temperature or at 120 ± 2 ℃ for 1 hour

　　7. The curing agent of Group B should be properly stored, and the container should be tightly sealed to prevent water leakage and air leakage, which may cause the paint to gel and deteriorate.

AfterSalesService :

• High brightness polyurethane enamel