Henan Luohe concrete epoxy sealing primer, alkali resistant sealing primer, permeable sealing primer

Description :

Epoxy sealing primer

　　Product Description: A two-component sealing paint composed of epoxy resin, additives, solvents, curing agents, etc.

　　Recommended use: Used as a surface sealing layer for cement concrete.

　　Color: Transparent

　　Drying time: surface drying ≤ 2h, actual drying ≤ 24h, fully cured 7d (25 ℃)

　　Specific gravity: about 0.9g/cm3

　　Flash point: 25 ℃

　　Proportion: Main paint curing agent=2:1 (weight ratio)

　　Number of coating layers: It is recommended to apply 1-2 layers to ensure that the ground is full.

　　Surface treatment: The primer should be dried and all oil stains and debris should be removed.

　　Construction conditions: The substrate temperature should be at least 3 ℃ higher than the air temperature; The ambient temperature shall not exceed 85% and the temperature shall not be lower than 5 ℃.

　　Subsequent paint: epoxy floor topcoat.

　　Storage: The product should be stored in a cool, dry, and well ventilated place, with a storage period of one year.

　　Health and safety:

　　On site paint workers should wear protective equipment, carefully check for the risk of fire and explosion, maintain good ventilation, avoid breathing paint mist, and avoid skin contact. If paint splashes on the skin, immediately rinse with suitable cleaning agents, soap, and water. If it splashes into the eyes, rinse with water and treat with medication.

　　Packaging specifications: Main paint 16kg/barrel Curing agent 8kg/barrel

AfterSalesService :

• Concrete epoxy sealing primer