Jiangxi camphor tree cooling glue insulation and anti-corrosion primer chemical raw material tank outer wall insulation and anti-corrosion heat reflection

Description :

Cooling glue insulation paint (base)

　　Composition characteristics:

　　This paint is composed of polymer synthetic resin, insulation material, glass microspheres, pigments, fillers, and additives

　　Composed of additives (excluding heavy metal elements such as lead).

　　Performance and Usage:

　　This paint uses a new type of insulation material and a thin coating layer to achieve insulation and cooling effects. Especially in high-temperature environments during summer, liquefied gas tanks, oil tanker trucks, oil storage tanks, and various chemical raw material tanks can reduce the energy consumption required for original cooling measures (such as using spray devices to keep oil tanks at a certain lower temperature in high-temperature environments during summer), and improve the environment. This product mainly utilizes special components in the paint film, such as insulation materials, whitening agents, polymer resins, etc. It isolates and reflects heat such as sunlight, achieving thermal insulation effect, creating a significant temperature difference between the surface and interior of the object, reducing temperature, and providing good thermal insulation effect. At the same time, it has a good anti-corrosion effect on metal surfaces and appearances.

　　1. Cold glue thermal insulation primer has replaced traditional red lead anti-corrosion paint, and rust inhibitors, rust prevention materials, and thermal insulation fillers have been added to the primer.

　　2. Cold glue insulation intermediate paint has good adhesion between the bottom and surface, while enhancing the anti-corrosion effect.

　　3. Cold glue insulation topcoat is applied to the surface layer to provide insulation, anti-corrosion, reflection, and can replace spraying, with high-performance anti-corrosion effect.

　　Construction technology:

　　1. Steel structural components and non-metallic surfaces can be coated without rust, oil, dust, etc.

　　2. Brushing, spraying, and rolling coating methods can be used.

　　3. When used on old equipment, it is necessary to remove loose and detached old paint skin, rust layer, dust, oil stains, etc., and use a polishing machine or wire brush to polish with sandpaper. The intact old paint skin can be retained for painting.

　　4. For severely corroded steel surfaces, a coat of 70-T rust coating or 88-1 degreasing and phosphating solution can be applied. After 24 hours of drying, the coating can be carried out.

　　5. Painting interval time. After brushing the primer, apply one coat every 24 hours before applying the intermediate coat and topcoat. Each coat of paint should be spaced 24 hours apart.

　　6. Pay attention to preventing rain during construction, and do not apply paint if there is water leakage on the surface. Keep in a fireproof, ventilated, breathable and dry place.

　　Packaging specifications: Main paint: 24kg/barrel Curing agent: 4kg/barrel

　　Proportion: 6:1 (weight ratio)

AfterSalesService :

• Cooling glue insulation and anti-corrosion primer