Hubei Yichang Chlorinated Rubber Anti corrosion Paint Steel Structure Chlorinated Rubber Coating Sea Grey Price
Hubei Yichang Chlorinated Rubber Anti corrosion Paint Steel Structure Chlorinated Rubber Coating Sea Grey Price

Hubei Yichang Chlorinated Rubber Anti corrosion Paint Steel Structure Chlorinated Rubber Coating Sea Grey Price

Category:

chemical industry/Coatings/Paints/Special coatings

Model:

hh789

Brand:

Elude

Retail Price

16.00USD


重量

kg

  • Product Description
  • Description :

    1Performance of chlorinated rubber topcoat;

    Has good heat resistance, acid and alkali resistance, and mechanical and physical properties;

    It has excellent low-temperature construction performance and can be used for construction in environments ranging from -20 ℃ to 50 ℃;+

    The paint film has good adhesion to steel;

    The paint film layers are mutually soluble and have excellent interlayer adhesion. In chlorinated rubber old paint

    2、 Application of Chlorinated Rubber Topcoat: This paint is suitable for heat-resistant and anti-corrosion protective coatings on steel surfaces and parts that are suitable for working below temperature, providing protection. It can also be used for corrosion prevention of ships, port terminals, offshore platform steel structures, petroleum and chemical pipelines, equipment outer walls, and other steel structures. Chlorinated rubber topcoat, as a matching paint, is suitable for steel structures, metallurgy, bridges, chemical equipment, etc

    Dry quickly, several times faster than oil-based paint;

    3、 Construction reference for chlorinated rubber topcoat:

    1. The surface of the sprayed steel must be polished clean and rust removed with fine sandpaper, and the oil and dirt must be wiped off with solvents such as toluene to thoroughly remove oil and rust,specialAfterwards, sandblasting treatment is carried out to make the sprayed surface appear grayish white.

    2. The chlorinated rubber topcoat must be prepared in proportion and stirred evenly before use. If there are foreign impurities mixed, they should be filtered before use. If the amount used at one time is not large, the amount should be prepared accordingly,

    To prevent excessive solidification and waste.

    3. When spraying, if the paint is too thick, it must be diluted with a special thinner to the required consistency before application. The film thickness is generally between 20-30 microns.

    AfterSalesService :

    Key words:
    • Chlorinated rubber anti-corrosion paint