Metal steel structure glass flake anti-corrosion primer

Description :

　　form: Glass flake anti-corrosion primerIt is a two-component coating composed of modified resin, epoxy vinyl resin, glass flakes, pigments, additives, and curing agents.

　　Performance: Water resistance and chemical superiority, strong adhesion, toughness and wear resistance, high mechanical strength, good seismic resistance, and a long anti-corrosion period.

　　Usage: Steel structures and concrete that require long-term corrosion protection for ships, marine engineering, and other applications.

　　Color: Grey

　　Density: Approximately 1.3g/c ㎡

　　Theoretical usage: 480 square meters

　　Wet film usage: 150-380um

　　Dry film usage: 100-200um

　　Proportion: Component A (paint): Component B (curing agent)=7:1

　　Flash point: 35 ℃

　　Maturity time: 30 minutes at 25 ℃

　　Applicable period: 25 ℃ for 3 hours

　　Drying time: 25 ℃, surface drying for 2 hours, actual drying for 24 hours

　　Re coating interval: 24 hours at 25 ℃

　　Previous matching coatings: epoxy zinc rich primer, epoxy cloud iron anti rust primer, or can be directly applied to the coated material that meets the quality requirements.

　　Rear supporting coatings: glass flake topcoat, epoxy topcoat, chlorinated rubber topcoat, chlorosulfonated polyethylene topcoat, high chlorinated polyethylene topcoat, polyurethane topcoat, acrylic topcoat. Alkyd topcoat.

　　Coating methods: high-pressure airless spraying, brushing, rolling coating

　　Diluent and dosage: Special diluent,<5%

　　Packaging method: 28kg/drum for component A, 4kg/drum for component B

　　Attention: The curing reaction is slow when the construction environment is below 10 ℃

　　Storage period: 12 months

AfterSalesService :

• Glass flake anti-corrosion primer