Introduction to VOCs Waste Gas Treatment: Xiamen Catalytic Combustion

Description :

　　Catalytic combustion is a purification method that uses catalysts to oxidize and decompose combustible substances in exhaust gas at lower temperatures. So, catalytic combustion is also known as catalytic chemical conversion. Due to the acceleration of the oxidation decomposition process by the catalyst, most hydrocarbons can be completely oxidized by the catalyst at temperatures of 300-450 ℃.

　　Compared with the thermal combustion method, catalytic combustion requires less auxiliary fuel, consumes less energy, and has smaller equipment and facilities. However, the promotion and application of this method in industrial production processes have been affected by issues such as catalyst poisoning, replacement of catalytic beds, and high cleaning costs.

　　Characteristics of acid mist purification tower:

　　The fiberglass acid mist purification tower uses fillers to purify exhaust gas, which is suitable for the treatment of continuous and intermittent emissions of exhaust gas; The process is simple, and the management, operation, and maintenance are quite convenient and concise, without causing any impact on the production of the workshop; Widely applicable and capable of purifying multiple types of pollutants simultaneously; Low pressure drop, high operational flexibility, and excellent defogging performance; The tower body can be made of materials such as FRP/PP/PVC according to the actual situation; The packing adopts efficient and low resistance Ball rings, which can thoroughly remove odors and harmful substances from the gas.

　　Technical principle of catalytic combustion exhaust gas treatment equipment

　　This purification device is designed based on two basic principles: adsorption (high efficiency) and catalytic combustion (energy saving), namely adsorption concentration catalytic combustion method. The device adopts dual gas path continuous operation, and two or more adsorption beds can be alternately used. A catalytic combustion chamber first adsorbs organic waste gas with activated carbon, stops the adsorption operation when it reaches saturation, and then uses a hot gas flow to desorb organic matter from the activated carbon for regeneration; The detached organic matter has been concentrated (with a concentration several tens of times higher than before) and sent to the catalytic combustion chamber for catalytic conversion into CO2 and H2O for discharge.

AfterSalesService :

• Catalytic combustion equipment