Manufacturer supplies dust bag filter and orders Quanzhou bag filter equipment

Description :

　　Product Maintenance

　　Regularly check the operation of control valves, pulse valves, and timers.

　　The failure of the pulse valve rubber diaphragm is a common fault in bag filters, which directly affects the dust cleaning effect. This device belongs to the external filter type, with a skeleton inside the bag. It is necessary to check whether the parts that fix the filter bag are loose and whether the tension of the filter bag is appropriate. Is the support frame smooth to prevent wear and tear on the filter bag. Compressed air is used for dust removal. Therefore, it is required to remove oil mist and water droplets, and the oil-water separator must be cleaned regularly to prevent malfunction of the moving mechanism and blockage of the filter bag.

　　Whether the air volume and pressure and temperature at each testing point are consistent with the design.

　　The installation status of the 3 filter bags, whether there are any occurrences of bag dropping, loosening, wear, etc. after use, can be judged by visually observing the emissions of the chimney after operation.

　　4. Prevent condensation

　　During use, it is necessary to prevent the gas from cooling below the dew point in the bag chamber, especially when using a bag filter under negative pressure. Due to the frequent leakage of air into the outer shell, the gas temperature in the bag chamber is lower than the dew point, causing the filter bag to become damp. This results in dust not being loose but sticking to the filter bag, blocking the fabric holes and causing dust removal failure. This leads to excessive pressure drop in the dust collector, making it unable to continue operating, and some bags may become stuck and unable to remove dust.

　　To prevent condensation, it is necessary to maintain the temperature of the gas in the dust collector and its system at 25-35 ℃ above its dew point (such as the dew point temperature of 58 ℃ for kiln mill integrated machines, and the operating temperature should be above 90 ℃), in order to ensure the good use effect of the filter bag.

　　chemical formula:

　　1. Immersion type, spray type, immersion spray combined type, spray immersion spray combined type.

　　2. Acid washing, phosphating slag removal, and oil-water separation devices are key systems. Phosphating slag removal includes commonly used methods such as sedimentation, rotary liquid separation, inclined plate sedimentation, bag filtration, and plate and frame filter press.

　　3. Oil water separation mainly includes adsorption method, ultrafiltration method, hot oil separation method, and centrifugation method.

　　Painting process. The necessary condition for obtaining high-quality coatings is a coating process that fully utilizes the performance of coating materials. The painting process includes the rationality and progressiveness of the painting technology; Progressiveness of painting equipment and tools; Progressiveness and reliability of painting equipment and tools; The painting environment conditions and the skills and qualities of the painting operators.

AfterSalesService :

• bag filter