Manufacturer provides catalytic combustion after-sales service, Xiamen catalytic combustion

Description :

　　Structural characteristics of RCO catalytic combustion

　　1. Easy to operate: The device can achieve automatic control during operation.

　　2. Low energy consumption: The equipment only needs 15-30 minutes to heat up to the ignition temperature (when the concentration of organic waste gas is high), and the energy consumption is only the fan power.

　　3. Reliable: The equipment is equipped with a fire suppression system, explosion-proof pressure relief system, over temperature alarm system, and advanced self-control system.

　　4. Low resistance and high purification efficiency: using advanced honeycomb ceramic carrier catalysts impregnated with precious metals palladium and platinum, with a large specific surface area.

　　5. Waste heat can be reused: Waste heat can be returned to the drying oven, reducing the power consumption in the original drying oven; It can also be used as a heat source in other aspects.

　　6. Small footprint: only 70% -80% of similar products in the same industry, and there are no special requirements for equipment foundation

　　The primary methods for treating organic waste gas now include adsorption, catalytic incineration, activated carbon adsorption, catalytic incineration, and absorption. Consider the feasibility, operating costs, equipment investment costs, and appropriate selection of treatment methods for secondary pollution issues. Previously, industrial waste gas treatment equipment mainly used filtration and adsorption methods. Medium efficiency filtration was used for filtration, and activated carbon adsorption was used for adsorption. The material's characteristics of multiple micropores and huge surface tension removed organic substances from the waste gas, including filtration, adsorption, and ozone disinfection. The use of activated carbon with high adsorption strength, combined with fan effect, can adsorb organic waste gas molecules, and has good adsorption effect on waste gases of organic solvents such as benzene, alcohols, ketones, esters, and gasoline. Eden Spray Painting Room Waste Gas Treatment Equipment Spray Painting Triphenyl Waste Gas Treatment Plan.

　　Catalytic combustion is a purification method that uses catalysts to oxidize and decompose combustible substances in exhaust gas at lower temperatures. So, catalytic combustion is also known as catalytic chemical conversion. Due to the acceleration of the oxidation decomposition process by the catalyst, most hydrocarbons can be completely oxidized by the catalyst at temperatures of 300-450 ℃.

　　Compared with the thermal combustion method, catalytic combustion requires less auxiliary fuel, consumes less energy, and has smaller equipment and facilities. However, the promotion and application of this method in industrial production processes have been affected by issues such as catalyst poisoning, replacement of catalytic beds, and high cleaning costs.

AfterSalesService :

• Catalytic combustion equipment