Manufacturer supplies industrial bag filter Quanzhou bag filter equipment quality

Description :

　　Product Maintenance

　　Regularly check the operation of control valves, pulse valves, and timers.

　　The failure of the pulse valve rubber diaphragm is a common fault in bag filters, which directly affects the dust cleaning effect. This device belongs to the external filter type, with a skeleton inside the bag. It is necessary to check whether the parts that fix the filter bag are loose and whether the tension of the filter bag is appropriate. Is the support frame smooth to prevent wear and tear on the filter bag. Compressed air is used for dust removal. Therefore, it is required to remove oil mist and water droplets, and the oil-water separator must be cleaned regularly to prevent malfunction of the moving mechanism and blockage of the filter bag.

　　Whether the air volume and pressure and temperature at each testing point are consistent with the design.

　　The installation status of the 3 filter bags, whether there are any occurrences of bag dropping, loosening, wear, etc. after use, can be judged by visually observing the emissions of the chimney after operation.

　　4. Prevent condensation

　　During use, it is necessary to prevent the gas from cooling below the dew point in the bag chamber, especially when using a bag filter under negative pressure. Due to the frequent leakage of air into the outer shell, the gas temperature in the bag chamber is lower than the dew point, causing the filter bag to become damp. This results in dust not being loose but sticking to the filter bag, blocking the fabric holes and causing dust removal failure. This leads to excessive pressure drop in the dust collector, making it unable to continue operating, and some bags may become stuck and unable to remove dust.

　　To prevent condensation, it is necessary to maintain the temperature of the gas in the dust collector and its system at 25-35 ℃ above its dew point (such as the dew point temperature of 58 ℃ for kiln mill integrated machines, and the operating temperature should be above 90 ℃), in order to ensure the good use effect of the filter bag.

　　Painting management. Coating management is an important condition for ensuring the implementation of coating processes, achieving coating objectives, and improving coating quality. Painting management includes process management, equipment management, process discipline management, on-site environmental management, personnel management, etc. Painting management is an essential part of modern painting processes

　　The main structure of the electrostatic precipitator equipment is a steel structure, all welded from steel sections, covered with skin (thin steel plate) and insulation materials on the outer surface for the convenience of design, manufacturing, and installation. The structural design adopts a layered form, with each piece consisting of several main beams in a frame style, and the pieces are connected to each other by large beams. In order to install the skin and insulation layer, secondary beams need to be welded between the main beams. For such a large structure, the workload and number of units will be very large if they are all connected according to physical objects.

AfterSalesService :

• bag filter