Quanzhou City's environmentally friendly and efficient oil fume purifiers are highly recommended for large quantities

Description :

　　Equipment material

　　The equipment shell is made of high-quality aluminum alloy profiles and cold-rolled plates, and the chassis is fully welded to ensure the reduction of equipment oil leakage. The cover plate is pickled, phosphated, and baked with paint to ensure strong adhesion of the coating and extend the service life of the equipment.

　　The internal plasma electric field electrode plate is made of high-quality AL1060 aluminum and stamped with a dedicated mold in one go to ensure high electric field accuracy.

　　The exhaust impeller adopts a dedicated high-quality volute free backward tilting fan impeller, and the surface is specially treated to improve the non stick oil time.

　　The sound-absorbing section uses high-quality glass fiber sound-absorbing materials and utilizes an internal porous grid structure system, allowing sound waves to easily and effectively enter the deep layers of the fiber body, converting sound energy into vibration energy that is converted and absorbed.

　　⑵ Equipment safety

　　The motor adopts a special branded motor with special insulation, high temperature, high grease, and high temperature resistance of 120 degrees, ensuring stable operation of the equipment;

　　The high-voltage generator adopts a high-quality power supply for purification, which contains safety control software. When the electric field pole plate is continuously arcing 8 times, the high-voltage generator automatically cuts off the power supply until the maintenance personnel repair and eliminate the fault, and then re energize before it can work normally again. Ensure the safety of equipment and maintenance personnel. The safety performance of this product has passed CE safety certification.

　　The oil fume is sucked into the electrostatic oil fume purification equipment by the fan, and locally larger oil droplets and oil particles are trapped on the flow plate due to mechanical collision and obstruction. When the airflow enters the high-voltage electrostatic field, under the action of the high-voltage electric field, the oil fume and smoke are ionized, the oil mist is charged, and most of it is degraded and carbonized; Under the electric field force and airflow of the adsorption electric field, a small number of small oil particles move towards the positive and negative plates of the electric field and are collected on the plates. They flow to the oil collection tray under their own gravity and are discharged through the exhaust duct. The remaining micrometer sized oil mist is degraded into carbon dioxide and water by the electric field, and clean air is discharged; At the same time, under the action of the high-voltage generator, ozone is generated in the air inside the electric field, removing most of the odors in the flue gas. Kitchen electrostatic fume purification equipment is a kitchen fume exhaust gas treatment device used for various users' food processing, such as gas stoves, gas stoves, diesel stoves, etc. in restaurants, bars, dining rooms, schools, offices, factories, and other places.

　　How to connect the oil fume purifier to electricity? The power supply of the oil fume purifier should be installed in the control box outside the electric field for use. The bottom of the power supply should be fixed at a certain distance from the control box, and a Z-shaped bracket can be used to facilitate ventilation and avoid power loss caused by high voltage magnetic short circuit of the power supply. Stay away from heat sources and high-temperature objects, and avoid direct sunlight. If the installation environment inevitably requires contact with heat sources, a fan cooling device should be installed in the control box as appropriate. When turning on the device power, the fan also needs to be started simultaneously or before.

　　The connection between the high-voltage output end of the oil fume purifier and the load (electric field) should be firm, reliable, and insulated. It is forbidden to turn on the power supply without connecting the load (electric field) to avoid the intrusion of conductive, dust, corrosive metal, and insulating material damaging gases in the surrounding area. The distance between the high-voltage power line and the conductor should be at least 3CM.

　　The insulation resistance of the electric field needs to be greater than 100M Ω before the power supply can be connected to high voltage. The control of equipment requires comprehensive system protection to ensure its normal operation. The installation of the power supply is not suitable for using a residual current switch. The power supply and electric field need to have a firm and reliable grounding. Regular inspection, maintenance, and cleaning should be carried out during use.

AfterSalesService :

• Oil fume purifier