Quanzhou Environmental Protection Oil Fume Purifier Manufacturer Cleaning

Description :

　　Wet treatment method

　　Use water or other detergents to form a water film and mist by spraying with a nozzle to absorb oil fumes. The oil fume particles come into contact with the water mist and water film sprayed from the nozzle, and through mutual inertial collision, retention, diffusion of fine particles, and mutual condensation, they flow down with the water droplets, thereby separating the oil fume ions from the airflow. This type of equipment has a simple structure, low investment, small footprint, low operating costs, and convenient maintenance and management.

　　Disadvantages: high resistance, low purification rate for submicron particles, and secondary pollution of oily wastewater.

　　The mechanical separation and purification equipment has low purification efficiency and is only suitable for situations with low pre-treatment or purification efficiency requirements;

　　The wet washing and purification equipment has a very low purification rate for submicron particles, and the generated washing solution still needs to be treated;

　　The filtration and purification equipment requires purification and replacement of filter media, which consumes a lot of energy; The cost of activated carbon adsorption purification equipment is too high;

　　The development of catalytic combustion purification equipment is not yet very mature;

　　The electrostatic purification efficiency equipment is increasingly demonstrating its superiority due to its high purification efficiency, low voltage drop, stable operation, and convenient maintenance and management, with a market share of nearly 90%.

　　The difference from traditional combination oil fume purification units is:

　　The processing technology of ordinary combination oil fume purifier: oil fume source → centrifugation → mechanical filtration → noise reduction (or adding activated carbon); It can remove oil mist with large particles but cannot remove smoke. (Using pure mechanical processing method)

　　The processing technology of SCYJF-C new combination oil fume purification unit: oil fume source → soundproofing sheet → centrifugal separation → coarse filtration layer → fine filtration layer → low-temperature plasma purification → soundproofing and deodorization section → standard flue gas; Not only can it remove oil, but it can also remove smoke.

　　The oil fume is sucked into the electrostatic oil fume purification equipment by the fan, and locally larger oil droplets and oil particles are trapped on the flow plate due to mechanical collision and obstruction. When the airflow enters the high-voltage electrostatic field, under the action of the high-voltage electric field, the oil fume and smoke are ionized, the oil mist is charged, and most of it is degraded and carbonized; Under the electric field force and airflow of the adsorption electric field, a small number of small oil particles move towards the positive and negative plates of the electric field and are collected on the plates. They flow to the oil collection tray under their own gravity and are discharged through the exhaust duct. The remaining micrometer sized oil mist is degraded into carbon dioxide and water by the electric field, and clean air is discharged; At the same time, under the action of the high-voltage generator, ozone is generated in the air inside the electric field, removing most of the odors in the flue gas. Kitchen electrostatic fume purification equipment is a kitchen fume exhaust gas treatment device used for various users' food processing, such as gas stoves, gas stoves, diesel stoves, etc. in restaurants, bars, dining rooms, schools, offices, factories, and other places.

AfterSalesService :

• Oil fume purifier