Shenyang Bottled Water High Flow Filter Manufacturer

Description :

　　Is a high flow filter suitable??? Before cooling water, RO, and resin filtration. It is a large-diameter, coreless, single pass structure, fluid folding filter that runs from the inside out. The new patented folding and 6/152mm large diameter design of this high flow filter element reduces the number of filters and the requirements for filter housing size. At the same time, multiple filtering media can be provided to meet other application requirements. High flow filter products are widely used in industries such as food, beverage, pharmaceutical, electronics, chemical, and power.

　　Application characteristics of high flow water filter element:

　　1. The high flow water filter element has high filtration accuracy and stable effluent quality;

　　2. The high flow water filter element achieves automatic backwashing through its own retrieval and response functions, which can cope with unstable water quality fluctuations without manual intervention;

　　3. The high flow water filter control system is responsive, operates, and has dual setting functions for pressure difference and time. It can flexibly adjust the backwash pressure difference or time setting value according to different water sources and filtration accuracies.

　　Performance characteristics of Parker high flow filter cartridge:

　　1. Gradient aperture folding structure;

　　2. When filtering water, the flow rate of a 40 inch filter cartridge can reach up to 110m3/h;

　　3. The size of the filtration system can be reduced by 50% when it is large;

　　4. The flow direction from the inside out ensures that all impurities are trapped inside the filter element.

　　The replacement method of high flow filter element: During this process, water usually overflows. Please prepare cleaning tools such as a basin or towel:

　　1. Turn off the electroplated ball valve and pressure tank ball valve;

　　2. Open the gooseneck faucet to drain any remaining water from the pipeline;

　　3. After the water no longer flows out, use a filter wrench to open the filter housing containing the filter element;

　　4. Remove the old high flow filter element and install a new filter element of the same specification;

　　5. Apply lubricant to the black "O" ring above the filter housing, and then place the "O" ring into the groove in the filter housing;

　　6. Tighten the filter housing vertically and try to avoid shifting the "O" ring as much as possible;

　　7. Open the electroplated ball valve and pressure tank ball valve.

　　Characteristics of Parker high flow filter element:

　　1. Allowing high flow media to pass through the filter material has advantages such as low pressure loss and long lifespan;

　　2. The filter element has two structural forms: external inlet and internal outlet, and internal inlet and external, which makes the application of the filter element more extensive and the installation more flexible;

　　3. The reliability of the O-ring filter;

　　4. The filter element can withstand a working pressure difference of 0.245MPa;

　　5. The folding surface design makes the pressure drop of the high flow filter lower and the service life longer than other filters;

　　6. The beta value of the filter element reaches 1000;

　　7. Multiple filter elements can be installed in the filter housing, which can use a wide range of flow rates and can be used both during start-up and continuous operation;

　　8. The filter element is durable and can be configured with fewer and more economical filters.

　　Xinxiang Haite Filter Co., Ltd. adheres to the concept of "quality for production, reputation for development", and sincerely welcomes customers from all over the world to consult and negotiate for win-win development.

AfterSalesService :

• High flow water filter element