Filter Self Cleaning Filter Fully Automatic Self Cleaning Filter Manufacturer Direct Delivery

Description :

　　Product Introduction for Self Cleaning Filters:

　　The self-cleaning filter consists of a housing, a multi-element filter element, a backwash mechanism, an electric control box, a reducer, an electric valve, and a differential pressure controller. The transverse partition inside the shell divides its inner cavity into upper and lower chambers. The upper chamber is equipped with multiple filter cartridges, which fully utilize the filtering space and significantly reduce the volume of the filter. The lower chamber is equipped with a backwash suction cup. During operation, the turbid liquid enters the lower chamber of the filter through the inlet, and then enters the inner chamber of the filter element through the partition hole. Impurities larger than the gap of the filter element are intercepted, and the clean liquid passes through the gap to reach the upper chamber and is sent out from the outlet.

　　Technical parameters of self-cleaning filter:

　　Single processing capacity: 45-2350m3/h

　　Work pressure: 0.1-2.5Mpa

　　Working water temperature: 95 ° C

　　Filtering accuracy range: ≥ 50 μ m

　　Water required for self-cleaning:<1%

　　Self cleaning time: 10-60 seconds

　　Self cleaning control mode: pressure difference, time, and manual

　　Electric control mode: AC three-phase 380V/50Hz

　　Control interface: digital display, knob, switch

　　Filter type: 316L woven mesh, wedge-shaped mesh

　　Product features of self-cleaning filters

　　1) The default filtration accuracy is 100 microns, and can be selected from 100 to 3000 microns. It has a large filtration area and high pollutant holding capacity, and users can customize it according to actual working conditions.

　　2) The cleaning method is simple, and the cleaning cycle is electronically monitored, which can achieve automatic cleaning and sewage discharge.. All parameters in the fully automatic self-cleaning filter control system can be adjusted.

　　3) Equipped with motor overload protection, it can effectively protect the motor.

　　4) It has the characteristics of uninterrupted water supply and no need for bypass during cleaning and sewage discharge, with short cleaning time and low sewage consumption, not exceeding 1% of the total flow rate.

　　5) Modular structure, strong maintainability, easy to install and disassemble.

　　6) The connection method with the user pipeline is flange connection, and the flange adopts national standard flange, which has strong universality.

　　Application areas of self-cleaning filters:

　　Fully automatic self-cleaning filters are widely used in circulating or non circulating cooling water systems, heat exchange systems, central air conditioning systems, central heating systems, hot water boiler systems, etc., to protect cooling equipment, heat exchange devices, air conditioners, boilers, etc. This device is suitable for a wide range of industries, including construction, chemical, power, metallurgy, rubber, paper, textile, coal, food and other industries.

AfterSalesService :

• filter