HaiTe Filter 592 * 592 * 46G4 Primary Effect Plate Frame Filter Purification Workshop Air Filter Manufacturer

Description :

Product features of 592 * 592 * 46G4 initial effect plate frame filter:

592 * 592 * 46G4 initial effect plate frame filterAs the name suggests, it refers to the use of the outer frame of the primary filterGalvanized frame production, beautiful, generous, sun treated, easy to use, easy to clean, and can be replaced and used multiple times The primary filter is mainly suitable for pre filtration of air conditioning and ventilation systems, pre filtration of local high-efficiency filtration devices for clean room air filtration, and for filtering dust particles with a particle size of 5um or above

592 * 592 * 46G4 initial effect plate frame filterThe methods are divided into the following categories:

Folding aluminum frame initial effect filter, flat aluminum frame initial effect filter, mother and child frame aluminum frame early effect filter, bag type aluminum frame initial effect filter.

592 * 592 * 46G4 initial effect plate frame filterThe filter media are divided into: polyester synthetic fiber (filter cotton), nylon mesh, aluminum mesh, stainless steel mesh, and activated carbon felt.

The primary filter is suitable for primary filtration in air conditioning systems, mainly used to filter dust particles larger than 5 μ m. There are three styles of primary filters: plate type, folding type, and bag type. The outer frame materials include paper frame, aluminum frame, and galvanized iron frame. The filter materials include non-woven fabric, nylon mesh, activated carbon filter material, metal mesh, etc. The protective mesh includes double-sided spray coated wire mesh and double-sided galvanized wire mesh.

1. When transporting and storing primary filters, they should be placed in the direction indicated by the manufacturer's logo. During transportation, handle with care to prevent severe vibration and collision, in order to avoid human damage.

2. Before installing the primary filter, the clean room must be cleaned, wiped, and purified. If there is dust accumulation inside the air conditioning system, it should be cleaned and wiped again to meet the cleaning requirements. If a primary filter is installed in the technical interlayer or ceiling, the technical interlayer or ceiling should also be cleaned and wiped.

3. After the cleanroom and purification air conditioning system meet the cleanliness requirements, the purification air conditioning system must be put into trial operation. Operate continuously for more than 12 hours, clean and wipe the clean room again, and immediately install the primary filter.

4. Before installing the primary filter, it is necessary to unpack the packaging at the installation site for visual inspection, including whether there are burrs and rust spots on the filter paper, sealant, and frame (metal frame), whether there is a product qualification certificate, and whether the technical performance meets the design requirements. Then carry out leak detection. Those that pass the inspection and leak detection should be installed immediately. During installation, reasonable adjustments should be made based on the resistance of each filter. For one-way flow, the difference between the rated resistance and average resistance of each filter on the same air outlet or supply surface should be less than 5%.

AfterSalesService :

• G4 initial effect plate frame filter