Self cleaning air filter principle Pulse self-cleaning air filter manufacturer

Description :

　　Product introduction of pulse self-cleaning air filter:

　　Under the negative suction pressure of the compressor, the pulse self-cleaning air filter sucks in the surrounding ambient air through the RH self-cleaning inlet filter. When the air passes through the high-efficiency filter cartridge, some of the coarse dust particles in the airflow settle to the bottom of the filter under the action of gravity and inertia force. The fine and low-density dust particles are deposited on the surface of the filter cartridge through the combined effects of Brownian diffusion and fiber interception. The purified gas enters the clean air chamber and is then sent out to the compressor through the outlet duct.

　　Technical parameters of pulse self-cleaning air filter:

　　1. Air filtration capacity suction status 48000Nm3/h

　　2. Total filtration area of 800m2

　　3. Filtering accuracy of 10 μ m

　　4. Filtration efficiency 99.99%

　　5. Initial filtration resistance loss ≤ 150Pa

　　6. Normal resistance loss ≤ 600Pa (adjustable)

　　7. The final filtration resistance loss can be customized by the customer (recommended 1500-2000Pa)

　　8. Alarm resistance loss 1200Pa (adjustable)

　　9. Dry air blowback volume 0.2 Nm3/min

　　10. Backblowing pressure 0.6-0.85 Mpa

　　11. Power consumption of 100W

　　12. Installation form: Outdoor vertical

　　13. Dimensions (mm) 3600 * 2250 * 2800

　　14. The total weight of the equipment is 3700Kg

　　Product features of pulse self-cleaning air filter:

　　1. This product can solve secondary pollution by adding a dust box, dust screen, and water flushing dust removal method at the bottom according to user requirements.

　　2. This device is controlled by an intelligent distributor and has three self-cleaning methods, namely (1) timed; (2) Pressure difference; (3) Manual.

　　3. This device can achieve automatic cleaning of air filter elements, allowing the device to operate normally without affecting the normal operation of other filter elements.

　　4. Can work normally under conditions of 100% relative humidity.

　　5. Large filtering area, low flow rate, low resistance, and LCD display resistance.

　　6. The filter element has a long service life. Under normal environmental conditions, the replacement cycle of filter elements can reach about 2 years.

　　7. The automation level is high, and the main components are imported, which can achieve unmanned operation.

　　8. Backblowing consumes less air, usually 0.1-0.3m3/min (in inhalation state); The pressure is 0.4-0.6Mpa.

　　9. The device is lightweight and is 1/3-1/2 the capacity of a bag type device.

　　10. Reasonable design, achieving a bend free design, high-rise modular combination type, easy and fast installation.

　　11. There are special requirements for self-cleaning filters, and our company can provide non-standard design according to customer requirements to meet their needs.

　　Application areas of pulse self-cleaning air filters:

　　1. Induced draft fan for blast furnace in steel plant;

　　2. Inlet of the oxygen production unit compressor;

　　3. Gas turbines and diesel engines of various capacities;

　　4. Air conditioning and supply systems for chemical fiber textile and electronic industries;

　　5. Central air conditioning systems with high requirements for air dust content;

　　6. Air conditioning supply systems for tobacco and paper industries.

AfterSalesService :

• Self cleaning air filter