Self cleaning air filter Pulse self-cleaning air filter Self cleaning air filter Principle of self-cleaning air filter

Description :

　　Product introduction of self-cleaning air filter:

　　The filter cartridge of a self-cleaning air filter is folded into pleats with a designed length of filter material, glued together at the beginning and end to form a cylinder. The inside and outside of the cylinder are supported by a metal frame, and the top and bottom are fixed with a top cover and base. The top cover has fixed bolts and washers. The shape of a circular filter cartridge or a flat filter cartridge. The upper and lower end covers of the filter cartridge, as well as the bonding of the protective net, should be reliable and free from defects such as delamination, leakage, and sagging; The metal parts on the filter cartridge should meet the requirements for rust prevention; The outer surface of the filter cartridge should be free of obvious scratches, bumps, burrs, and other defects; The blowing and cleaning of the filter cartridge can be equipped with induction nozzles or Venturi tubes as needed. A protective net should be added to the inside of the filter cartridge. When selecting filter cartridges with D ≥ 320mm and H ≥ 1200mm, induction nozzles should be used.

　　Technical parameters of self-cleaning air filter:

　　1. Processing air volume (Nm3/h: 14400~54000)

　　2. Filter area (m?): 240-900

　　3. Number of filter cartridges: 12/16/20/24/30/35/42

　　4. Filtering accuracy: 1 micron

　　5. Power consumption (W): 100/150

　　6. Backblowing volume (m3/min): 0.1/0.2

　　7. Backblowing pressure (Mpa): 0.4-0.6

　　8. Equipment shell steel plate/thickness: 3mm/4mm

　　Product features of self-cleaning air filters:

　　1. The self-cleaning air filter equipment is controlled by an intelligent distributor, and there are three self-cleaning methods, namely (1) timed; (2) Pressure difference; (3) Manual.

　　2. This device can achieve automatic cleaning of air filter elements, allowing the device to operate normally without affecting the normal operation of other filter elements.

　　3. Can work normally under conditions of 100% relative humidity.

　　4. Large filtering area, low flow rate, low resistance, and LCD display resistance.

　　5. The filter element has a long service life. Under normal environmental conditions, the replacement cycle of filter elements can reach about 2 years.

　　6. The automation level is high, and the main components are imported, which can achieve unmanned operation.

　　7. Backblowing consumes less air, usually 0.1-0.3m3/min (in inhalation state); The pressure is 0.4-0.6Mpa.

　　Application areas of self-cleaning air filters:

　　1. Various types of air compression stations in different industries, and multiple small capacity compressors can be used together

　　2. Raw material air compressor for oxygen production station.

　　3. Blast furnace blower in steel plant.

　　4. Gas turbines of various capacities

　　5. A diesel engine that requires a long period of operation.

　　6. Air conditioning supply system for chemical fiber textile industry.

　　7. A centralized air conditioning system with high requirements for air dust content.

　　8. Pollution and prevention of chemical industry solutions

AfterSalesService :

• Self cleaning air filter