400m obstacle equipment standard 400m manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; The standard for 400 meter obstacle equipment is that the main frame of the 400 meter obstacle equipment is made of 12 gauge channel steel welded into an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over.

　　Surface treatment of 400m barrier equipment: all steel parts are subject to surface treatment after primary treatment such as pickling, phosphating, sanding, etc. The imported electrostatic epoxy based powder coating is used for surface treatment. The coating thickness is 70-80um, pencil hardness is up to 3H+, and the test object has passed the GB1771-91 36 hour salt spray test. The coating film has no change, and the single-sided corrosion at the grid is< 2mm. The product has the advantages of acid and alkali resistance, moisture and heat resistance, anti-aging, and beautiful appearance. It can be used indoors and outdoors in humid and acid rain environments, and the product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　400 meter obstacle equipment structure: Two supporting columns horizontally support a circular bar (with a constant diameter) to form a horizontal bar. 400 meter obstacle equipment. Source manufacturer of 400 meter obstacle equipment

　　The supporting column stands upright on the ground There is a chassis below

　　The 400 meter obstacle equipment uses four ropes (with a diameter of up to 1 centimeter) to pull the horizontal bar upright Four ropes are connected to four ground hooks on the ground

　　400 meter obstacle equipment size: The diameter of the horizontal bar is 2.8 centimeters with an allowable error of+-0.01 centimeters, the distance between two connection points is 240 centimeters with an allowable error of+-1 centimeter, the distance between the joints is at least 200 centimeters with an allowable error of+-1 centimeter, and the distance from the ground to the high-level of the horizontal bar is 275 centimeters with an allowable error of+-1 centimeter

　　Distance between ground hooks: allowable error+-5 centimeters for horizontal direction of 550 centimeters, allowable error+-5 centimeters for vertical direction of 400 centimeters. Function feature: adjustable, must be able to increase the height by 5 centimeters through height adjustment

　　The horizontal bar of 400 meter obstacle equipment must have elasticity Guaranteed not to break Elasticity does not only come from rods The equipment as a whole also has elasticity This is the floor hook Supporting pillars The installation and tension of steel ropes must strictly comply with the requirements The reason for ensuring uniform elasticity The pole and supporting column must be connected by a flexible joint To ensure effective elasticity The lever must allow for turning and sliding movements on it At the same time, it is not easy to slip The entire device must be stable When in use The support column cannot move or swing. The standard for 400 meter obstacle equipment is 400 meter quality

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. 400m obstacle equipment standard 400m manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. Shaanxi manganese steel parallel bars quotation, college outdoor fire exercise equipment manufacturer, value for money sports and leisure gymnastics products, parallel bars, Tianjin fiberglass parallel bars quotation, college outdoor fire exercise path manufacturer, high-quality and affordable Xingtai children's parallel bars quotation, college outdoor specialized training, 400 meter obstacle equipment, DuMu Bridge factory, multiple training equipment, fire training path manufacturer, value for money packaging introduction, Dachuang keywords, parallel bars, contact merchants, talk to Shandong Dachuang equipment manufacturer, business nature, state-owned enterprise location, river Tianjin training, 400 meter obstacle equipment, DuMu Bridge factory, multiple training equipment, North Shaanxi address, No. 362 Heping East Road, telephone inspection, factory introduction, view supplier location, inspection, parallel bar product information, view parallel bar supply information, enter the manufacturer's website description, Xingtai manganese steel parallel bar quotation, college outdoor fire training path factory, Tianjin training 400 meter barrier equipment single plank bridge Multiple manufacturers of training equipment, affordable prices, high and low horizontal bar parameters, quality assurance. Xingtai University buried horizontal bar manufacturer. The bar is 3 meters long and made of 40mm diameter steel pipe. The column is made of 48mm diameter steel pipe and 400m obstacle equipment standard

　　Height 1400mm, outdoor; The parallel bars are made of seamless steel pipes as the columns, and the water Tianjin training 400 meter obstacle equipment is equipped with multiple single wooden bridge manufacturers. The mud infusion of various training equipment makes it more sturdy. Ordinary steel is only a combination of iron and carbon, while manganese steel has a complex composition. This product is suitable for outdoor installation and training operations in schools, residential areas, and households. It is made of steel pipes with a length of 3 meters and a diameter of 40mm. It is supplied to Nanning and can be disassembled. The price is excellent. It is sold in Tianjin and is a popular place for training. It is a manufacturer of 400 meter barrier equipment and a single wooden bridge. It is important to install multiple types of training equipment such as buried horizontal bars, high-low horizontal bars, and fire training equipment. The metal frame supports two parallel wooden, plastic, or synthetic metal bars. High quality steel pipe, directly buried 400mm underground and poured with cement. 2. The horizontal bar is selected from the Tianjin Training 400m Obstacle Equipment Independent Wooden Bridge Manufacturer. Multiple training equipment use high-tech steel pipe bars with elasticity, while buried horizontal bars do not have this feature. Merchant Product Series: Advanced Horizontal Bar, Horizontal Bar, Advanced Horizontal Bar, Underground Horizontal Bar Competition, Horizontal Bar: Tianjin Training, 400m Obstacle Equipment, Solitary Wooden Bridge Manufacturer, Multiple Training Equipment, 400m Obstacle Equipment, 400m Obstacle Equipment, Crossing the Sea and Island Equipment

　　Detailed specifications of 400 meter obstacle equipment; 400m obstacle equipment standard 400m manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. 400m obstacle equipment standard 400m manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. 400m Obstacle Equipment Standard 400m Manufacturer 300m Obstacle Equipment 1. Crossing Pile: Composed of 5 crossing piles with a diameter of 30cm and a height of 10cm above the ground The midpoints of the three spans on the right are 2.30 meters apart and 30 centimeters away from the centerline of the runway. The midpoint of one span is 5 meters away from the end line The midpoints of the two span stakes on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of one span stake is 6.15 meters away from the end line The cross pile is composed of wooden piles and cement. 2. Trench: length, width, and depth of 2 meters each The ditch wall should be a vertical plane 3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards. 4. High board jumping platform horizontal ladder: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters 400 meter obstacle movement, 400 meter obstacle equipment, 400 meter obstacle

　　300 meter obstacle equipment 5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined board length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes

　　6. High wall: width, height of 2 meters each, thickness of 20 centimeters It is mainly composed of wooden boards 7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　Training equipment, training equipment, sports equipment, with 20 years of industry experience, our products are sold well in China. We have a set of 400m obstacle equipment and 400m obstacle equipment for crossing the sea and landing on islands

　　Three hundred meter obstacle training ground, four hundred meter obstacle, parallel bars, horizontal bars, flying wheel (fixed roller), outdoor fitness equipment, comprehensive training equipment,

　　Five types of training equipment, including 400 meter sea crossing and island landing, dog equipment, navy roller, hanging ladder, sentry post, customized training equipment, form run, punch target stand, sandbag, sandbag stand, hunter training equipment, American style obstacle equipment, dog obstacle equipment, 500 meter obstacle, rope climbing pole combination, rope climbing pole customized equipment, wooden horse pedal, and more

　　High platform; Height of 1.5 meters, length and width of 1 meter each. 400m obstacle equipment standard 400m manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. 400m obstacle equipment standard 400m manufacturer

　　400m obstacle equipment manufacturer tells you: the process of making 400m obstacle equipment 400m obstacle equipment standard 400m manufacturer

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. 400m obstacle equipment standard 400m manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users. 400m obstacle equipment standard 400m manufacturer

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment