400 meter obstacle equipment manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, 100 meter obstacle equipment, Huaihua 400 meter obstacle equipment manufacturer's process: 400 meter obstacle equipment, training obstacle equipment, 100 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

　　The middle is made of cedar wood with a thickness of

　　Stability is good, and a normal adult will not flip over when turning over.

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting. 400 meter obstacle equipment training 300 meter obstacle 100 meter obstacle equipment

　　Huaihua 400m obstacle equipment manufacturer specifications:

　　Specification: 1. Cross pile: composed of 5 cross piles with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane Supply of 400 meter obstacle training equipment manufacturer

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　4. High board jumping platform: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　5. Dumu Bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined plate length 2 meters, width 20 centimeters. The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes.

　　6. High wall: width, height of 2 meters each, thickness of 20 centimeters Mainly composed of wooden boards.

　　7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes. 400m obstacle equipment standard 400m manufacturer

　　How much does a set of Huaihua 400 meter obstacle equipment manufacturer cost

　　How much does a set of 10cm 400m obstacle equipment cost, how much does a set of 20cm 400m obstacle equipment cost, single item price, horizontal ladder price, ground stake net quotation, and how much does a set of 400m obstacle equipment cost for crossing the sea and landing on the island.

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. 300 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three spans on the right are 2.30 meters apart and 30 centimeters away from the centerline of the runway. The midpoint of one span is 5 meters away from the end line The midpoints of the two span stakes on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of one span stake is 6.15 meters away from the end line The cross pile is composed of wooden piles and cement. 2. Trench: length, width, and depth of 2 meters each The ditch wall should be a vertical plane 3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards. 4. High board jumping platform horizontal ladder: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters. It is equipped with 400 meters of obstacle equipment and 100 meters of obstacle equipment

　　300 meter obstacle equipment 5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined board length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes

　　6. High wall: width, height of 2 meters each, thickness of 20 centimeters It is mainly composed of wooden boards 7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　Training equipment, training equipment, sports equipment, with 20 years of industry experience, our products are selling well in China's 400 meter obstacle equipment, training obstacle equipment, and 100 meter obstacle equipment

　　Three hundred meter obstacle training ground, four hundred meter obstacle, parallel bars, horizontal bars, flying wheel (fixed roller), outdoor fitness equipment, comprehensive training equipment,

　　Five types of training equipment, including 400 meter sea crossing and island landing, dog equipment, navy roller, hanging ladder, sentry post, customized training equipment, form run, punch target stand, sandbag, sandbag stand, hunter training equipment, American style obstacle equipment, dog obstacle equipment, 500 meter obstacle, rope climbing pole combination, rope climbing pole customized equipment, wooden horse pedal, and more

　　Detailed specifications of 400 meter obstacle equipment; A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, 100 meter obstacle training equipment, 400 meter obstacle equipment manufacturer overview: 400 meter obstacle training equipment, 100 meter obstacle equipment

　　Your satisfaction is my pursuit. In the new century, our company will work together with you to create the glory of China's sports industry with a pioneering and innovative spirit, a sincere and trustworthy attitude, and excellent quality and service. With the business philosophy of "emphasizing technology, quality, and reputation", we sincerely welcome friends from all walks of life to inquire and visit us.

　　Training 400m Obstacle Equipment Manufacturer Product Description: Supply 400m Obstacle Movement 400m Obstacle Equipment Quality

　　Passing the 400 meter obstacle is one of the traditional sports training events and an important part of physical fitness training Obstacle training can develop basic skills such as running, jumping, climbing, supporting balance, and crawling that people need in action. It can also improve physical fitness such as speed, endurance, coordination, and agility, cultivate courage and perseverance, and lay a good foundation for quickly overcoming various artificial and natural obstacles during wartime （2） Preparation Activity 1, General Preparation Activity (1) Arm movement, 4 x 8 beats; (2) Chest expansion exercise, 4 x 8 beats; (3) Side movement, 4 x 8 beats; Abdominal and back exercises, 4 x 8 beats; (5) Leg press exercise, 4 x 8 beats; (6) Hip rotation movement (fast), 4 x 8 beats; (7) Jumping exercise, 4 x 8 beats. 2, specialized preparation activity (1) Slow running object 400 meters; (2) Take small steps of 30 meters twice; (3) Run 40 meters with high legs twice; Step back and run 30 meters twice; (5) Accelerate to run 60 meters twice （3） The 400 meter obstacle course consists of two parts: running on flat ground and passing through obstacles. 1. The movement technique of running on flat ground The movements of running on flat ground can be divided into starting run, turning run, and finishing run

　　Training for 400m Obstacle Equipment Manufacturer: 400m Obstacle Equipment Training for 300m Obstacle Equipment Manufacturer

　　Departure run: refers to a 100 meter run from the starting point to an obstacle The starting position can be either standing or prone; The running techniques are basically the same as the running movements during short distance running The movements should be relaxed, the stride should be wide, and the rhythm should be clear (2) Turning Run: The 400 meter obstacle course requires three turns to run When running in a bend, tilt your body inward, increase the back kick force and swing amplitude of your outer leg, and land on the ground with the inside of your foot. Correspondingly, increase the swing force and amplitude of your outer arm Turn the inner leg inward, then turn the foot inward and land on the outside of the foot. The swing of the same side arm is slightly smaller than that of the outer arm

　　Endpoint Run: Endpoint Run refers to a 100 meter sprint from the last obstacle to the finish line The movement technique of running is basically the same as that of running and hitting the finish line in short distance running. 2. The movement technique of passing through obstacles (1) Crossing the 3-step pile: ① Through methods Run to the front edge of the crossing line, step on the ground with one leg, take a big step forward with the other leg, and use the forefoot to step on the base of the stake Then quickly take a big step forward with your feet on the ground, and use your forefoot to step on the second pile surface Step on the third pile surface with your hind foot, then take a step forward with your other leg and land in front of the end line ② Protection methods Firstly, remove the sand and soil from the circular pile to prevent slipping Secondly, there are 1-2 protectors standing on either side of the sandpit. When the practitioner makes a mistake, they quickly support their arms to prevent injury from falling. Supply of 400 meter obstacle mobility equipment manufacturer

　　High platform; Height of 1.5 meters, length and width of 1 meter each. A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment is a set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users. A set of 400 meter obstacle equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment