400 meter obstacle equipment manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; 400m Obstacle Equipment 400m Obstacle Equipment Manufacturer 400m Obstacle Equipment is an important subject in the daily training of officers and soldiers. There are two common obstacles in our army: old and new, which are set up for different battlefield environments. Comrades who have relatively more exposure to the old 400 meter obstacle may be a bit unfamiliar with the new one, so here we will introduce the new obstacle - crossing the sea and landing on the island 400 meters. The 400 meter obstacle equipment is designed to simulate the actual combat environment of sea crossing and landing operations, with a focus on improving the adaptability of individual soldiers to sea combat. Following the laws of physical training and the principle of system combination, it simulates the special states of loading, crossing, transfer, and beach landing to varying degrees, integrating collective ability, skills, and psychological training to meet the training needs of sea crossing and landing operations. The venue adopts 4 turns, with a total of 10 projects, including the runway and obstacles set at intervals on the runway. 400 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three spans on the right are 2.30 meters apart and 30 centimeters away from the centerline of the runway. The midpoint of one span is 5 meters away from the end line The midpoints of the two span stakes on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of one span stake is 6.15 meters away from the end line The cross pile is composed of wooden piles and cement 400 meter obstacle equipment trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane 3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards. 4. High board jumping platform horizontal ladder: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters A set of 400 meter obstacle equipment, mobile 400 meter obstacle equipment, 400 meter obstacle equipment

　　400m obstacle equipment, 400m obstacle, parallel bars, horizontal bars, flight wheels (fixed rollers), outdoor fitness equipment, comprehensive training equipment, five training equipment, 400m sea crossing and island landing, dog equipment, navy roller, hanging ladder, sentry post, customized training equipment, figure race, fist target rack, sandbag, sandbag rack, hunter training equipment, American style obstacle equipment, dog obstacle equipment, 500m obstacle, rope climbing pole combination, rope climbing pole customized equipment, wooden horse pedal, and many other equipment

　　400 meter obstacle equipment 100 meter run → turn around the flag → cross the three-step stake → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the flag and return → cross the low pile net → climb over the high wall → turn around the column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step stake → turn around the flag → run 100 meters to the finish line. Supply of 400 meter obstacle mobility equipment from the source manufacturer

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. 400 meter obstacle equipment manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. Standard 400m obstacle specifications and dimensions, customized by 400m obstacle manufacturer

　　The 400 meter obstacle training is a physical fitness training that causes great suffering for many soldiers. In this training, there are a total of 16 various obstacles, and it is generally not easy for people to complete the 400 meter obstacle. Those who have served in the military know that there is a time limit for 400 meter obstacle training, and the qualifying time is two and a half minutes. We know that it takes more than a minute to run 400 meters without obstacles, but how many people can guarantee to complete it in two and a half minutes in front of 16 obstacles? So the 400 meter obstacle is a terrifying presence for many soldiers, and there are also many instructors who use the 400 meter obstacle as one of the corporal punishment projects. Many people are also aware of the five kilometer load off-road, and relatively speaking, most soldiers would choose the five kilometer load off-road rather than the 400 meter obstacle. This shows how terrifying the 400 meter obstacle training is. The 400 meter obstacle is a traditional sports training project in our army. Through training, we can develop comprehensive skills such as running, jumping, climbing, supporting, balancing, and crawling in action, improve physical fitness such as speed, endurance, coordination, and agility, cultivate brave, tenacious, and persevering willpower, and lay a good foundation for overcoming various artificial and natural obstacles during wartime. Now let Brother Bing teach you how to pass the 400 meter obstacle. The 400 meter obstacle is a physical training project that involves 8 sets of obstacles and 16 obstacles, forming a 400 meter round trip obstacle field. The sequence of passing is: running 100 meters flat - turning - crossing 3 step stakes - jumping over a low wall when crossing a trench - climbing a high board jumping platform - passing through a cloud ladder - passing through a single wooden bridge - climbing over a high wall - crawling through a low pile net - turning (returning) - crossing a low pull net - climbing over a high wall - bypassing a bridge column - passing through a cloud ladder - crossing a high board jumping platform - drilling through a hole - jumping down and climbing up a trench - crossing 5 step stakes - turning - reaching the end point of 100 meters. The 400 meter obstacle is the training equipment for a hundred meter obstacle. Equipment

　　Detailed specifications of 400 meter obstacle equipment; 400 meter obstacle equipment manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. 400 meter obstacle equipment manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. 400m Obstacle Equipment 400m Obstacle Equipment Manufacturer - Dachuang is committed to customized processing of 400m, 300m, 500m, and five training equipment. Dachuang Sports is honest, reliable, and reputable, providing you with comprehensive services. You are worth choosing!

　　The passing criteria for the assessment items are divided by age, and there are seven groups of obstacles in the 400 meter obstacle course. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through 14 obstacles. Cheng is composed of the following seven obstacles: cross pile, trench, low wall, high board jumping platform, single plank bridge, high wall, and low pile net. 400 meter obstacle equipment, 300 meter obstacle equipment, 100 meter obstacle equipment

　　The passing criteria are: 2 minutes and 30 seconds for those under 25 years old, 2 minutes and 40 seconds for those between 25 and 30 years old, 2 minutes and 50 seconds for those between 30-35 years old, and no assessment for those over 35 years old.

　　The content of the 400 meter obstacle:

　　100 meters: sprint 100 meters to the opposite side.

　　Two hundred meters: through five step stakes, jumping deep pits, flying low boards, benches, climbing high and low platforms, climbing cloud ladders, climbing single wooden bridges, high board walls, and drilling wire mesh.

　　Three hundred meters: jumping low pile net, high slab wall, drilling bridge pier, passing cloud ladder, high and low platform, drilling low slab wall, deep pit (2M), three-step pile.

　　400 meters: sprint back 100 meters. 400m Obstacle Standard 400m Obstacle Manufacturer

　　Price reference:

　　1. 1.2 meters * 0.6 meters * 0.05 meters Available colors: blue, green

　　Thickened Oxford cloth+pearl cotton

　　1. Cross pile: composed of 5 cross piles with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane. The standard for 400 meter obstacle equipment is from the manufacturer of the 400 meter obstacle source

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　400 meter obstacle equipment manufacturer 4. High board jumping platform: (High board height 1.80 meters, length 2 meters, width 50 centimeters, thickness 5-8 centimeters.) High platform height 1.5 meters, length and width 1 meter each Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　High platform; Height of 1.5 meters, length and width of 1 meter each. 400 meter obstacle equipment manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. 400 meter obstacle equipment manufacturer

　　400m obstacle equipment manufacturer tells you: the process of making 400m obstacle equipment 400m obstacle equipment 400m obstacle equipment manufacturer

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. 400 meter obstacle equipment manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users. 400 meter obstacle equipment manufacturer

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment