400m Obstacle Equipment Standard 400m Obstacle Manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; 400 meter obstacle equipment standard: Does the manufacturer of the 400 meter obstacle equipment use anti-corrosion wood? The manufacturer of the 400 meter obstacle equipment is made of laminated and reinforced camphor pine wood (at least the wooden surface) or any other moisture absorbing material with the same wood function (impact strength, moisture absorption, neutral to magnesium oxide). 400m obstacle equipment 400m obstacle equipment 100m obstacle equipment

　　Column bases, pillars, and bars: made of steel or cast iron. The entire product is processed by anti-corrosion glaze and electroplating spraying high-temperature spraying treatment on both the top and bottom. There will be no marks or scratches on the board.

　　The joints of wood are made using ancient Chinese woodworking techniques, such as crescent moon carving and bamboo shoot carving.

　　Steel parts:

　　1. Uniform thickness and no hard edges; 400 meter obstacle equipment training, 300 meter obstacle armament, 400 meter obstacle training

　　2. The quality and color of spray painting or plastic spraying are uniform and uniform, without bubbles, wrinkles, or dirt spots.

　　3. No cracks, no scars, and no tortuosity;

　　The overall product is sturdy and practical.

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. 400 meter obstacle equipment factory manufacturer ships directly

　　Expansion equipment was already used in the field as early as World War II. Training with 400 meter obstacle equipment can exercise how to overcome fear, weakness, and tension under collective crisis pressure and clear personal responsibility, and establish the confidence of courage and victory. How to achieve organizational and personal goals at critical moments and occasions. At the same time, expanding equipment also plays an important role in the "sexual" cultivation of soldiers. 400m obstacle training, 300m obstacle, 100m obstacle equipment

　　The rule for the 400 meter journey is: the soldier starts from the starting point in a low position and lies prone, runs 100 meters in an empty position, and then turns to enter the obstacle zone. The quotation for training equipment in Lanzhou, Gansu Province includes a 200 meter turning point in the obstacle zone, consisting of five connected piles, wide trenches, low boards, high benches, single wooden bridges, high boards, and barbed wire. Take another turn, jump over the barbed wire fence, climb the high board, drill the bridge hole, go up the high platform, drill the low board hole, go down the deep pit, connect the three piles, then take another turn and run back to the starting point empty. Smoothly and quickly passing through obstacles is an important guarantee for completing the journey. Therefore, running on flat ground for the first 100 meters requires speed, ease, and effort. In the process of running between obstacles, there should be a step point adjustment stage, that is, after passing through obstacles, the step point should be adjusted well, and before passing through the next obstacle, the running speed should be slightly increased, with a clear rhythm, to achieve the goal of smoothly and quickly passing through obstacles.

　　Our company's product sales outlets are located throughout the country. Our core products include 400 meter obstacle equipment, parallel bars, horizontal bars, gymnastics mats, basketball hoops, badminton and volleyball, table tennis tables, track and field equipment, outdoor fitness equipment, plastic field paving, artificial turf paving, etc. 400 meter obstacle equipment standard, 400 meter manufacturer

　　Detailed specifications of 400 meter obstacle equipment; 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer Huaihua 400m Obstacle Equipment Manufacturer Process: 400m Obstacle Training Obstacle Equipment Source Manufacturer

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

　　The middle is made of cedar wood with a thickness of

　　Stability is good, and a normal adult will not flip over when turning over.

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting. 400 meter obstacle standard, 400 meter manufacturer

　　Huaihua 400m obstacle equipment manufacturer specifications:

　　Specification: 1. Cross pile: composed of 5 cross piles with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane. The standard for 400 meter obstacle equipment is 400 meters from the source manufacturer

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　4. High board jumping platform: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　5. Dumu Bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined plate length 2 meters, width 20 centimeters. The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes.

　　6. High wall: width, height of 2 meters each, thickness of 20 centimeters Mainly composed of wooden boards.

　　7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes. Supply 400 meter obstacle training equipment, 400 meter obstacle training equipment, and 100 meter obstacle equipment

　　How much does a set of Huaihua 400 meter obstacle equipment manufacturer cost

　　How much does a set of 10cm 400m obstacle equipment cost, how much does a set of 20cm 400m obstacle equipment cost, single item price, horizontal ladder price, ground stake net quotation, and how much does a set of 400m obstacle equipment cost for crossing the sea and landing on the island.

　　High platform; Height of 1.5 meters, length and width of 1 meter each. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　400m obstacle equipment manufacturer tells you: the process of making 400m obstacle equipment 400m obstacle equipment standard 400m obstacle equipment manufacturer

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment