400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; 400m Obstacle 400m Obstacle Equipment Armed 400m Obstacle 400m Obstacle 400m Obstacle refers to a runway composed of eight sets of obstacles including cross stakes, trenches, low walls, high board jumping platforms, cloud ladders, single plank bridges, high walls, and low stake nets. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through obstacles 16 times. The sequence of passing is: 100 meters run → turn around the flag → cross the three-step pile → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the flag and return → cross the low pile net → climb over the high wall → turn around the column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step pile → turn around the flag → run 100 meters to the finish line. There are a total of 14 obstacles, mainly including training facilities such as cross piles, trenches, low walls, high board jumping platforms, single plank bridges, and high walls The flagpole is 1.5 meters high and has a diameter of about 5 centimeters. It consists of 5 cross stakes with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two span piles on the left are 2.3 meters apart and 0.6 meters away from the centerline of the runway. The midpoint of the first span pile is 6.15 meters away from the end line. Specifications for a single wooden bridge, dimensions of 5 * 0.25 * 0.23 meters, parameters for a single wooden bridge, price for a single wooden bridge, manufacturer of a single wooden bridge, length of 5 meters, height of 1.3 meters, diameter of 20-25 centimeters, width of the bridge plane of 10 centimeters, length of the inclined plate of 2 meters, and width of 20 centimeters. The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes. High wall, low wall, high board jumping platform, single plank bridge, ground pile net 400 meter obstacle standard 400 meter obstacle armed 400 meter obstacle

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. 400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards.

　　Detailed specifications of 400 meter obstacle equipment; 400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. 400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Is the 400 meter obstacle equipment armed with anti-corrosion wood? The 400 meter obstacle equipment is made of laminated reinforced camphor pine wood (at least the wooden surface) or any other moisture absorbing material with the same wood function (impact strength, moisture absorption, neutral to magnesium oxide). 400m Obstacle 400m Obstacle Training Equipment Manufacturer

　　Column bases, pillars, and bars: made of steel or cast iron. The entire product is processed by anti-corrosion glaze and electroplating spraying high-temperature spraying treatment on both the top and bottom. There will be no marks or scratches on the board.

　　The joints of wood are made using ancient Chinese woodworking techniques, such as crescent moon carving and bamboo shoot carving.

　　Steel parts:

　　1. Uniform thickness and no hard edges; Supply of 400 meter obstacle mobility equipment manufacturer

　　2. The quality and color of spray painting or plastic spraying are uniform and uniform, without bubbles, wrinkles, or dirt spots.

　　3. No cracks, no scars, and no tortuosity;

　　The overall product is sturdy and practical.

　　High platform; Height of 1.5 meters, length and width of 1 meter each. 400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. 400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

　　400m obstacle equipment manufacturer tells you: the process of making 400m obstacle equipment 400m obstacle equipment armed 400m obstacle

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. 400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users. 400 meter obstacle, 400 meter obstacle equipment, armed 400 meter obstacle

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment