400 meter obstacle standard, 400 meter manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; If it weren't for Zhao Jiwei's shoulder dislocation being reimbursed this season, Gao Shiyan might not have been included in the Liaoning men's basketball team's 12 man roster; If it weren't for Cong Mingchen's absence from the Star Rui tournament for some reason, Gao Shiyan wouldn't have had the opportunity to participate in this Star Weekend. From this perspective, Gao Shiyan is fortunate. Statistics show that so far this season, Gao Shiyan has only had a record of playing in 12 games, with an average playing time of only two and a half minutes per game. 400 meter obstacle equipment mobile 400 meter obstacle equipment manufacturer

　　However, being able to occupy a place in the Liaoning men's basketball team, which is rich in defenders, is enough to show that Gao Shiyan is not an ordinary person. Although this season is Gao Shiyan's "rookie" season in the CBA, he has previously represented "national" teams - Gao Shiyan, born in 1996, was selected for the U19 national youth team. In the North Star Rui team, Gao Shiyan is not a player, nor is he a major contender for MVP. But in the Star Rui tournament, which emphasized talent and self-expression without constraints or tactics, this young man who was unknown in the club turned the entire third quarter into a stage for his own performance, and even improvised Harden's classic celebratory move of "sprinkling salt". If it weren't for the dogmatic selection of MVP, Xu Tao's Star Rui MVP honor should belong to Gao Shiyan.

　　In the Liaoning team, Gao Shiyan doesn't speak much about the 400 meter obstacle facility, but he trains very hard. Gao Shiyan once said that his idol is Yang Ming, and judging from his performance in the Star Rui tournament, he has the potential to become a defender. However, the Liaoning men's basketball defense line is indeed full of talents. Whether in the national youth team or currently in the Liaoning team, Gao Shiyan is Zhao Jiwei's substitute, let alone competing with Hudson and Guo Ailun for the starting position. But with time, Gao Shiyan will definitely give Liaoning fans a surprise. 400 meter obstacle facility, 400 meter obstacle equipment training, 300 meter obstacle manufacturer

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. 400 meter obstacle standard, 400 meter manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. 400 meter obstacle equipment refers to a runway consisting of eight sets of obstacles including cross stakes, trenches, low walls, high jump platforms, cloud ladders, single plank bridges, high walls, and low stake nets. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through obstacles 16 times. The order of passing the 400 meter obstacle equipment is: 100 meter run → turn around the sign flag → cross the three-step stake → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the sign flag and return → cross the low pile net → climb over the high wall → bypass the column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step stake → turn around the sign flag → run 100 meters to the finish line. 400 meter obstacle standard, 400 meter manufacturer

　　400 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane. 400 meter obstacle equipment standard. 400 meter obstacle manufacturer

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　400 meter obstacle equipment 4. High board jumping platform: (High board height 1.80 meters, length 2 meters, width 50 centimeters, thickness 5-8 centimeters.) High platform height 1.5 meters, length and width 1 meter each Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined plate length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes

　　400 meter obstacle equipment 6. High wall: 2 meters wide, 2 meters high, and 20 centimeters thick It is mainly composed of wooden boards Supply 400 meter obstacle training and 300 meter obstacle manufacturer

　　7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　The 400 meter obstacle course for crossing the sea and landing on the island is designed to simulate the actual combat environment of crossing the sea and landing operations, with a focus on improving the adaptability of individual soldiers to sea combat. Following the laws of physical training and the principle of system combination, it simulates the special states of loading, crossing, transfer, and beach landing to varying degrees, integrating collective ability, skills, and psychological training to meet the training needs of crossing the sea and landing operations. The venue adopts 4 turns, with a total of 10 projects, including the runway and obstacles set at intervals on the runway.

　　Detailed specifications of 400 meter obstacle equipment; 400 meter obstacle standard, 400 meter manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. 400 meter obstacle standard, 400 meter manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. 400m Obstacle Standard 400m Manufacturer Jinhua 400m Obstacle Equipment Manufacturer Material Selection: Our factory uses national standard steel and strictly follows the material requirements specified by the National Sports Goods Quality Inspection Center for production and processing. The main and auxiliary materials used in the product, such as iron plates, bearings, plastic powder, welding wire, etc., are all produced by domestic qualified and reputable manufacturers. You can rest assured of the quality. 400m obstacle equipment standard 400m obstacle armed 400m obstacle

　　Jinhua 400m obstacle equipment manufacturer's product technology: The surface adopts electrostatic powder spraying technology, which greatly improves weather resistance and impact resistance, and the color remains unchanged for eight years. In addition, the surface shot blasting hardening and purification green environmental protection technology are used in the previous process, making the surface quality of the product reach the international advanced level and more environmentally friendly than the traditional phosphating treatment process. All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, while also preventing scratches from sharp edges during use. The surface meets the requirements of commonality, safety, and image.

　　Packaging and installation of Jinhua 400m barrier equipment manufacturer: shipped in bulk by overseas customers, packed with pearl foam and nylon cloth. The bottom fixing point has expansion bolts or uses a concrete base.

　　Reminder from Jinhua 400m obstacle equipment manufacturer: Due to the large volume and irregular nature of the equipment, it cannot be shipped by express delivery or post office. It can only be transported to a county-level freight station through dedicated logistics and picked up by the customer. If customers need home delivery, they need to contact the local logistics company for specific matters.

　　Zhangzhou 400m Obstacle Equipment Manufacturer Process: 400m Obstacle Equipment Mobile 400m Obstacle Equipment Quality

　　1. The main frame adopts channel steel welded into an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over.

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting.

　　Zhangzhou 400m Obstacle Equipment Manufacturer Buyer Notice:

　　1. Freight: As the products sold in our store are bulk goods and cannot be shipped by express delivery, customers from other places can only transport them to the local city or county freight station through logistics. Customers need to pick them up by themselves. The freight fee is subject to the actual logistics quotation, and the template freight fee is for reference only. You can choose cash on delivery for shipping costs. Please consult customer service in a timely manner before confirming your purchase. Please evaluate based on the quality and service of the goods themselves, and do not give a neutral or negative rating due to logistics delays! Thank you!

　　2. On the product image: The pictures in the store are for reference only. If there are slight differences between the actual product and the pictures, please refer to the actual product. 400 meter obstacle movement, 400 meter obstacle equipment quality

　　3. Payment method and invoice: We strongly recommend you to use Alipay, and also accept bank remittance. After you take the picture of payment, we will arrange shipment for you as soon as possible. All products in the store are priced without tax. If customers need an invoice, please inform the sales staff when purchasing. Our factory will collect taxes according to the national tax invoice quota and provide a formal invoice.

　　The order in which Zhangzhou's 400 meter obstacle equipment manufacturers pass is:

　　100 meter run → turn around the flag → cross the three-step pile → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the flag and return → cross the low pile net → climb over the high wall → bypass the standing column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step pile → turn around the flag → run 100 meters to the finish line. 400 meter obstacle standard, 400 meter source manufacturer

　　High platform; Height of 1.5 meters, length and width of 1 meter each. 400 meter obstacle standard, 400 meter manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. 400 meter obstacle standard, 400 meter manufacturer

　　400m obstacle equipment manufacturer tells you: the process of making 400m obstacle equipment 400m obstacle standard 400m manufacturer

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. 400 meter obstacle standard, 400 meter manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users. 400 meter obstacle standard, 400 meter manufacturer

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment