400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment 400 meter obstacle board high board specifications:

　　The product specifications for the mobile badminton column include a base length of cm, a width of cm, a height of cm, and a total column height of m. The product material is a mobile badminton column with a base weight of KG, using a cast iron base, double wheel movement, and electrostatic spraying. The badminton column, also known as the badminton stand, is made of iron material. The standard badminton column badminton stand consists of two parts: the column pole and the column chassis. A pulley device is located near the middle of the column pole to tighten the rope of the ball net. The column chassis is composed of a certain amount of iron blocks, connected to the lower end of the badminton stand pole, and balanced with the center of gravity of the net pole. The badminton pillars produced by our company include electroplated rod badminton pillars, spray painted badminton pillars, mobile badminton pillars, badminton referee chair material cast iron bases, ABS cement bases, pillar specifications in meters, diameter in centimeters, height in meters, weight in kilograms. The product features precision processing using new materials, a large base, good stability, and equipped with linked moving wheels, making it easier to push. The badminton pillars can be moved directly by pushing them, and the wheels are made of nylon products, which are durable and long-lasting.

　　Detailed specifications of 400 meter obstacle board; Supply 400 meter obstacle and 300 meter obstacle quality

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line.

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick.

　　High platform; Height of 1.5 meters, length and width of 1 meter each.

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters. A set of 400 meter obstacle equipment training and 300 meter obstacle crossing and island landing equipment

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a sand layer.

　　Most sports projects can be completed through the joint participation of student groups. Therefore, for such sports, there is no need to discuss with individual students, and the results of student groups can be directly tested or summarized by student group representatives, which can greatly save classroom time and leave more time for students to participate in sports activities. The interaction with students as a whole occupies an important position in the minds of primary school students. The "authoritative" style is obviously not in line with the development requirements of the new curriculum reform. Therefore, sports should change the previous teaching mentality, strive to "blend in" with students, participate in student activities on an equal footing, and achieve overall interaction with students, as well as create a sense of trust among students and build a good teacher-student relationship.

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. Huaihua 400m Obstacle Equipment Manufacturer Process: 400m Obstacle Standard 400m Obstacle Manufacturer

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

　　The middle is made of cedar wood with a thickness of

　　Stability is good, and a normal adult will not flip over when turning over.

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　Huaihua 400m obstacle equipment manufacturer specifications:

　　Specification: 1. Cross pile: composed of 5 cross piles with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane A set of 400m obstacle equipment standard 400m obstacle manufacturer

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　4. High board jumping platform: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　5. Dumu Bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined plate length 2 meters, width 20 centimeters. The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes.

　　6. High wall: width, height of 2 meters each, thickness of 20 centimeters Mainly composed of wooden boards.

　　7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes. 400 meter obstacle equipment standard, 400 meter sea crossing and island landing equipment

　　How much does a set of Huaihua 400 meter obstacle equipment manufacturer cost

　　How much does a set of 10cm 400m obstacle equipment cost, how much does a set of 20cm 400m obstacle equipment cost, single item price, horizontal ladder price, ground stake net quotation, and how much does a set of 400m obstacle equipment cost for crossing the sea and landing on the island.

　　Detailed specifications of 400 meter obstacle equipment; 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. The 400 meter obstacle training equipment includes a double rope pool, tire wall, single plank bridge, floor, soft inclined rope, high railing, square window, circular hole, Irish high board, continuous low wall, horizontal hanging ladder, inclined wall trench, and low pile net. On a 300 meter long (reversible) runway, it is required that the site be flat, the soil be hard, the edges be paved with curbstones, and the adjacent edges of various obstacles be at a certain distance. The low price bar for 400 meter obstacle equipment is aimed at cultivating high-quality and long-term stable supply of 400 meter obstacle equipment manufacturers in Jiuquan. It is an essential part of strengthening the body and making good use of high and low bars. Choosing the right manufacturer to improve the production process of high and low bars ensures shipment and customer satisfaction. You cannot make a wrong comparison. 400m Obstacle Equipment Standard 400m Obstacle Crossing and Island Landing Equipment

　　The 400 barrier price personnel use tools to assemble and fully ensure the strength of the instrument connection. The packaging uses bubble pads and woven bags for double packaging, which is beautiful and safe to ensure the needs of long-distance transportation. Product Material: Steel, and strictly produced according to the materials specified by the National Sports Goods Quality Inspection Center. We guarantee the same quality at the same price and provide genuine products. Please feel free to purchase with confidence. 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　The 400 meter obstacle refers to a runway consisting of eight sets of obstacles, including a cross pile, trench, low wall, high board jumping platform, cloud ladder, single wooden bridge, high wall, and low pile net. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through obstacles 16 times.

　　For the 400 meter obstacle, it is necessary to focus on swinging and soaring movements, as well as appropriate stopping and exertion movements. Chinese athletes are also skilled in using the support swing of the parallel bars, and in hanging movements, they have also entered the Shanxi Yuci Wujing School's 400 meter obstacle equipment manufacturer for easier quality steps.

　　400 obstacle quality is easier. Hebei Dachuang Cultural and Sports Equipment Sales Department sincerely welcomes your call. The product styles are all suitable for national quality inspection standards. One set of 400 meter obstacle equipment and 400 meter obstacle equipment for crossing the sea and landing on islands

　　400 obstacles (height of 1.80 meters, length of 2 meters, width of 50 centimeters, thickness of 5-8 centimeters), high platform height of 1.5 meters, length and width of 1 meter each Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　High platform; Height of 1.5 meters, length and width of 1 meter each. 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment 400 meter obstacle training equipment 100 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users. 400 meter obstacle 400 meter obstacle training equipment 100 meter obstacle equipment

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment