Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Yulin 400m Obstacle 400m Obstacle Training Equipment Crossing the Sea and Island Landing Equipment Guizhou 400m Obstacle Equipment Set Price Fire Training Low Pile Net Solitary Bridge Manufacturer Tangshan 400m Obstacle Equipment Training 300m Obstacle Manufacturer

　　Physical allocation for 400 meter obstacle running. The 400 meter obstacle race requires running at a "uniform" speed to complete the distance. The 400 meter obstacle requires running 100 meters on flat ground before passing through the obstacle. It has to travel back and forth 200 meters, passing through 14 obstacles. Smoothly and quickly passing through obstacles is an important guarantee for completing the journey. Therefore, running on flat ground for the first 100 meters requires speed, ease, and effort. In the process of running between obstacles, there should be a step point adjustment stage, that is, after passing through obstacles, the step point should be adjusted well, and before passing through the next obstacle, the running speed should be slightly increased, with a clear rhythm, to achieve the goal of smoothly and quickly passing through obstacles. When all obstacles are passed, the race enters the finish line, demanding strength and carrying forward the spirit of tenacious struggle to reach the finish line. A set of 400 meter obstacle equipment standard for crossing the sea and landing on islands in Shijiazhuang

　　Composition, set at least 1

　　Manufacturer's process for 400 meter obstacle equipment:

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

　　A set of obstacle equipment with a thickness of 400 meters made of fir wood in the middle, Guizhou. Price: fire training, low pile net, single wooden bridge manufacturer

　　Stability is good, and a normal adult will not flip over when turning over. Changzhou 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting.

　　Surface treatment of 400 meter obstacle equipment manufacturer: All steel parts are treated with primary treatments such as acid washing, phosphating, and sanding, and then sprayed with imported electrostatic epoxy powder for surface treatment. The coating thickness is 70-80um, and the pencil hardness reaches 3H+

　　Expansion equipment: Langmu covers an area of 400 meters in Guizhou. A set of obstacle equipment is available at a price. Fire training: Low pile net. Single wooden bridge manufacturer. 400 meter obstacle training method

　　100 meters: sprint 100 meters to the opposite Xuzhou with a set of 400 meter obstacle equipment standard 400 meter manufacturer

　　Two hundred meters: through five step stakes, jumping deep pits, flying low boards, climbing high benches, crossing high and low platforms, climbing cloud ladders, climbing single wooden bridges, high board walls, and drilling wire mesh

　　Three hundred meters: jumping low pile net, high slab wall, drilling bridge pier, cloud ladder, high and low platform, drilling low slab wall, deep pit (2M), three-step pile

　　400m: 100m Sprint Return to Guizhou 400m Obstacle Equipment Set Price Fire Training Low Pile Net Single Wooden Bridge Manufacturer

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. 400 Obstacle Factory - Dachuang is committed to customizing and processing training equipment for 400 meters, 300 meters, 500 meters, and five other types. Dachuang Sports is honest, reliable, and reputable, providing you with comprehensive services. You are worth choosing!

　　The passing criteria for the assessment items are divided by age, and there are seven groups of obstacles in the 400 meter obstacle course. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through 14 obstacles. Cheng is composed of the following seven obstacles: cross pile, trench, low wall, high board jumping platform, single plank bridge, high wall, and low pile net. Nantong 400 meter obstacle equipment training obstacle equipment 100 meter obstacle equipment

　　The passing criteria are: 2 minutes and 30 seconds for those under 25 years old, 2 minutes and 40 seconds for those between 25 and 30 years old, 2 minutes and 50 seconds for those between 30-35 years old, and no assessment for those over 35 years old.

　　The content of the 400 meter obstacle:

　　100 meters: sprint 100 meters to the opposite side.

　　Two hundred meters: through five step stakes, jumping deep pits, flying low boards, benches, climbing high and low platforms, climbing cloud ladders, climbing single wooden bridges, high board walls, and drilling wire mesh.

　　Three hundred meters: jumping low pile net, high slab wall, drilling bridge pier, passing cloud ladder, high and low platform, drilling low slab wall, deep pit (2M), three-step pile.

　　400 meters: sprint back 100 meters. Zhangzhou 400 meter obstacle equipment mobile 400 meter obstacle equipment 100 meter obstacle equipment

　　Price reference:

　　1. 1.2 meters * 0.6 meters * 0.05 meters Available colors: blue, green

　　Thickened Oxford cloth+pearl cotton

　　1. Cross pile: composed of 5 cross piles with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane Taizhou 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　400 meter obstacle equipment manufacturer 4. High board jumping platform: (High board height 1.80 meters, length 2 meters, width 50 centimeters, thickness 5-8 centimeters.) High platform height 1.5 meters, length and width 1 meter each Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　Detailed specifications of 400 meter obstacle equipment; Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Yulin 400m Obstacle 400m Obstacle Training Equipment Crossing the Sea and Island Training 400m Obstacle Equipment Manufacturer Overview: Qingyang 400m Obstacle Equipment 400m Obstacle Equipment Armed 400m Obstacle

　　Your satisfaction is my pursuit. In the new century, our company will work together with you to create the glory of China's sports industry with a pioneering and innovative spirit, a sincere and trustworthy attitude, and excellent quality and service. With the business philosophy of "emphasizing technology, quality, and reputation", we sincerely welcome friends from all walks of life to inquire and visit us.

　　Training 400m Obstacle Equipment Manufacturer Product Description: Yan'an 400m Obstacle Equipment Training Obstacle Equipment Crossing the Sea Island Equipment

　　Passing the 400 meter obstacle is one of the traditional sports training events and an important part of physical fitness training Obstacle training can develop basic skills such as running, jumping, climbing, supporting balance, and crawling that people need in action. It can also improve physical fitness such as speed, endurance, coordination, and agility, cultivate courage and perseverance, and lay a good foundation for quickly overcoming various artificial and natural obstacles during wartime （2） Preparation Activity 1, General Preparation Activity (1) Arm movement, 4 x 8 beats; (2) Chest expansion exercise, 4 x 8 beats; (3) Side movement, 4 x 8 beats; Abdominal and back exercises, 4 x 8 beats; (5) Leg press exercise, 4 x 8 beats; (6) Hip rotation movement (fast), 4 x 8 beats; (7) Jumping exercise, 4 x 8 beats. 2, specialized preparation activity (1) Slow running object 400 meters; (2) Take small steps of 30 meters twice; (3) Run 40 meters with high legs twice; Step back and run 30 meters twice; (5) Accelerate to run 60 meters twice （3） The 400 meter obstacle course consists of two parts: running on flat ground and passing through obstacles. 1. The movement technique of running on flat ground The movements of running on flat ground can be divided into starting run, turning run, and finishing run

　　Training 400 meter obstacle equipment manufacturer uses: Jiuquan 400 meter obstacle equipment training 300 meter obstacle 400 meter obstacle

　　Departure run: refers to a 100 meter run from the starting point to an obstacle The starting position can be either standing or prone; The running techniques are basically the same as the running movements during short distance running The movements should be relaxed, the stride should be wide, and the rhythm should be clear (2) Turning Run: The 400 meter obstacle course requires three turns to run When running in a bend, tilt your body inward, increase the back kick force and swing amplitude of your outer leg, and land on the ground with the inside of your foot. Correspondingly, increase the swing force and amplitude of your outer arm Turn the inner leg inward, then turn the foot inward and land on the outside of the foot. The swing of the same side arm is slightly smaller than that of the outer arm

　　Endpoint Run: Endpoint Run refers to a 100 meter sprint from the last obstacle to the finish line The movement technique of running is basically the same as that of running and hitting the finish line in short distance running. 2. The movement technique of passing through obstacles (1) Crossing the 3-step pile: ① Through methods Run to the front edge of the crossing line, step on the ground with one leg, take a big step forward with the other leg, and use the forefoot to step on the base of the stake Then quickly take a big step forward with your feet on the ground, and use your forefoot to step on the second pile surface Step on the third pile surface with your hind foot, then take a step forward with your other leg and land in front of the end line ② Protection methods Firstly, remove the sand and soil from the circular pile to prevent slipping Secondly, there are 1-2 protectors standing on either side of the sandpit. When the practitioner makes a mistake, they quickly support their arms to prevent injury from falling. A set of 400 meter obstacle training equipment and 100 meter obstacle training equipment in Zhangzhou

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price Yulin 400m Obstacle 400m Obstacle Training Equipment Cross Sea Landing Equipment

AfterSalesService :

• 400 meter obstacle equipment