Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer 400m Obstacle Equipment is mainly used for officers and soldiers to master and improve skills such as running, jumping, climbing, supporting, balancing, and crawling required for combat operations, enhance physical fitness such as speed, endurance, and sensitivity, cultivate brave and tenacious will, and lay a good foundation for overcoming various obstacles during wartime. Jiuquan 400m Obstacle Equipment Mobile 400m Obstacle Equipment 400m Obstacle

　　The 400 meter obstacle course consists of the following seven obstacles: cross pile, trench, low wall, high board jumping platform, horizontal ladder, single wooden bridge, high wall, and low pile net

　　400 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three spans on the right are 2.30 meters apart and 30 centimeters away from the centerline of the runway. The midpoint of one span is 5 meters away from the end line The midpoints of the two span stakes on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of one span stake is 6.15 meters away from the end line The cross pile is composed of wooden piles and cement 400 meter obstacle equipment 2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane 3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards. 4. High board jumping platform horizontal ladder: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　400 meter obstacle equipment 5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined board length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes Zhangzhou 400m Obstacle Standard 400m 400m Obstacle

　　6. High wall: width, height of 2 meters each, thickness of 20 centimeters It is mainly composed of wooden boards 7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　400 meter obstacle equipment, training equipment, sports equipment, with 20 years of industry experience, our products are sold well in China

　　Three hundred meter obstacle training ground, four hundred meter obstacle, parallel bars, horizontal bars, flying wheel (fixed roller), outdoor fitness equipment, comprehensive training equipment,

　　Five types of training equipment, including 400 meter sea crossing and island landing, dog equipment, navy roller, hanging ladder, sentry post, customized training equipment, form run, punch target stand, sandbag, sandbag stand, hunter training equipment, American obstacle equipment, dog obstacle equipment, 500 meter obstacle, rope climbing pole combination, rope climbing pole customized equipment, wooden horse pedal, and more

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. 400 meter obstacle equipment refers to a runway consisting of eight sets of obstacles including cross stakes, trenches, low walls, high jump platforms, cloud ladders, single plank bridges, high walls, and low stake nets. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through obstacles 16 times. The order of passing the 400 meter obstacle equipment is: 100 meter run → turn around the sign flag → cross the three-step stake → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the sign flag and return → cross the low pile net → climb over the high wall → bypass the column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step stake → turn around the sign flag → run 100 meters to the finish line. Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

　　400 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane Langfang 400m Obstacle Equipment Standard 400m 400m Obstacle

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　400 meter obstacle equipment 4. High board jumping platform: (High board height 1.80 meters, length 2 meters, width 50 centimeters, thickness 5-8 centimeters.) High platform height 1.5 meters, length and width 1 meter each Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined plate length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes

　　400 meter obstacle equipment 6. High wall: 2 meters wide, 2 meters high, and 20 centimeters thick It is mainly composed of wooden boards Qingyang 400m Obstacle Equipment Training 300m Obstacle Crossing and Island Landing Equipment

　　7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　The 400 meter obstacle course for crossing the sea and landing on the island is designed to simulate the actual combat environment of crossing the sea and landing operations, with a focus on improving the adaptability of individual soldiers to sea combat. Following the laws of physical training and the principle of system combination, it simulates the special states of loading, crossing, transfer, and beach landing to varying degrees, integrating collective ability, skills, and psychological training to meet the training needs of crossing the sea and landing operations. The venue adopts 4 turns, with a total of 10 projects, including the runway and obstacles set at intervals on the runway.

　　Detailed specifications of 400 meter obstacle equipment; Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer 400m Obstacle Equipment Manufacturer Manufacturing Process: 1. The main frame is made of 12 # channel steel welded into an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. 2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　Introduction to the processing project of the 400 meter obstacle equipment manufacturer: The 100 meter obstacle race is a facility suitable for student competition, mainly consisting of five step stakes, deep pits, low walls, single plank bridges, high obstacle boards, high and low jumping platforms, and crawling forward events. Participants must break through all events one by one and return to their original place to win. 400 meter obstacle equipment processing 2. Project function: Through training in the 100 meter obstacle race, participants' physical fitness such as running, jumping, climbing, etc. is improved, enabling them to correctly handle gains and losses in competition and understand the importance of teamwork. Xianyang 400 meter obstacle equipment mobile 400 meter obstacle equipment 100 meter obstacle equipment

　　Manufacturers of 400 meter obstacle equipment include: low pile net, high and low jumping platform, high wall, single plank bridge, low wall, deep pit, jumping pile, etc. The number of projects and venue size can be customized according to the training requirements.

　　400 meter obstacle equipment manufacturer service: If you have better suggestions or opinions about our product styles and types, you can contact our customer service in a timely manner, and we will make improvements according to your needs. Thank you very much for your support.

　　What is the quality of the 400 meter obstacle equipment manufacturer? So, what are the advantages of our 400 meter obstacle equipment. Dachuang Training Equipment Production is a pioneer and leader in the market. The manufacturer that produces 400 meter obstacle equipment is the first to start. Others follow suit, so it goes without saying whose quality is high and whose price is low. Huai'an 400m Obstacle Equipment Mobile 400m Obstacle Equipment Manufacturer

　　The main components of the 400 meter obstacle equipment manufacturer are: this is a 400 meter obstacle training ground designed to meet the physical training requirements for crossing the sea and landing on islands. Including the runway and obstacles set at intervals on the runway, the described obstacles are 1 soft ladder, 2 spiral ladders, 3 high and low crossbars, 4 rope nets, 5 tire climbing platforms, 6 swing platforms, 7 swing horizontal ladders, 8 span nets, 9 barrier walls, and 10 simulated beaches arranged in sequence.

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price Changzhou 400m Obstacle Standard 400m Obstacle Manufacturer

AfterSalesService :

• 400 meter obstacle equipment