Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; A set of 400 meter obstacle equipment standard in Tangshan, 400 meter manufacturer, 400 meter obstacle equipment production and processing manufacturer, obstacle board, single wooden bridge, Xianyang, a set of 400 meter obstacle equipment, 400 meter obstacle training equipment, 400 meter obstacle

　　The main products of the 400 meter obstacle equipment production and processing factory include five step stakes, low walls, high board jumping platforms, horizontal ladders, single plank bridges, high walls, horizontal bars, parallel bars, etc.

　　400 meter obstacle equipment production and processing factory, single wooden bridge manufacturer, Chengdu high wall manufacturer, etc. Our technology is only produced for you, what are you waiting for? We are your trusted brand. Jinhua set of 400 meter obstacle equipment training, 300 meter obstacle, 100 meter obstacle equipment

　　The 400 meter obstacle equipment production and processing factory is in the process of promoting the "big market, big enterprise, big brand" strategy. Good sales have been achieved nationwide, with Yongping Sports selling 400 meter obstacle equipment in Dalian. The training equipment website is located in over 30 provinces and cities including Linfen, Tianjin, Changsha, Nanning, Jilin, Shijiazhuang, Linyi, Shandong, Heilongjiang, etc. We warmly serve our customers and strive to provide products that are suitable for national sports equipment supervision and inspection. Always strengthen the craftsmanship of products. Horizontal bar manufacturers continue to develop strongly. At the same time, our factory actively engages in exchanges and cooperation with nationally renowned equipment to accelerate the pace of expanding into the Chinese market.

　　Purpose:

　　1. Exercise the learning attitude of trainees to work hard and pursue certain grades and goals;

　　2. Train trainees in a new environment where their work efficiency will not be greatly affected by changes in the environment;

　　3. Train students to have a clear understanding of their own strengths and weaknesses. Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

　　The military training obstacle course equipment is provided by Dachuang as a builder, allowing you to train safely and become a true man.

　　Always facing a large amount of physical training to improve combat ability, I, as a manufacturer of obstacle equipment, provide * obstacle race training equipment to ensure a certain level of exercise. Iron blooded tenderness is better demonstrated on Dachuang's 400 meter obstacle course equipment.

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. The main frame of the 400 meter obstacle equipment is welded with 12 gauge channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over.

　　Surface treatment of 400m barrier equipment: all steel parts are subject to surface treatment after primary treatment such as pickling, phosphating, sanding, etc. The imported electrostatic epoxy based powder coating is used for surface treatment. The coating thickness is 70-80um, pencil hardness is up to 3H+, and the test object has passed the GB1771-91 36 hour salt spray test. The coating film has no change, and the single-sided corrosion at the grid is< 2mm. The product has the advantages of acid and alkali resistance, moisture and heat resistance, anti-aging, and beautiful appearance. It can be used indoors and outdoors in humid and acid rain environments, and the product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Structure of 400 meter obstacle equipment: Two supporting columns horizontally support a circular bar (with a constant diameter) to form a horizontal bar Langfang 400m Obstacle Training Obstacle Equipment 400m Obstacle

　　The supporting column stands upright on the ground There is a chassis below

　　The 400 meter obstacle equipment uses four ropes (with a diameter of up to 1 centimeter) to pull the horizontal bar upright Four ropes are connected to four ground hooks on the ground

　　400 meter obstacle equipment size: The diameter of the horizontal bar is 2.8 centimeters with an allowable error of+-0.01 centimeters, the distance between two connection points is 240 centimeters with an allowable error of+-1 centimeter, the distance between the joints is at least 200 centimeters with an allowable error of+-1 centimeter, and the distance from the ground to the high-level of the horizontal bar is 275 centimeters with an allowable error of+-1 centimeter

　　Distance between ground hooks: allowable error+-5 centimeters for horizontal direction of 550 centimeters, allowable error+-5 centimeters for vertical direction of 400 centimeters. Function feature: adjustable, must be able to increase the height by 5 centimeters through height adjustment

　　The horizontal bar of 400 meter obstacle equipment must have elasticity Guaranteed not to break Elasticity does not only come from rods The equipment as a whole also has elasticity This is the floor hook Supporting pillars The installation and tension of steel ropes must strictly comply with the requirements The reason for ensuring uniform elasticity The pole and supporting column must be connected by a flexible joint To ensure effective elasticity The lever must allow for turning and sliding movements on it At the same time, it is not easy to slip The entire device must be stable When in use The supporting column cannot move or swing Suqian 400m obstacle equipment 400m obstacle equipment armed 400m obstacle

　　Detailed specifications of 400 meter obstacle equipment; Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Tangshan set of 400 meter obstacle equipment standard, 400 meter manufacturer, Guizhou set of 400 meter obstacle equipment price, fire training, low pile net, single wooden bridge manufacturer, Fuzhou 400 meter obstacle training, 300 meter obstacle, 400 meter obstacle

　　Physical allocation for 400 meter obstacle running. The 400 meter obstacle race requires running at a "uniform" speed to complete the distance. The 400 meter obstacle requires running 100 meters on flat ground before passing through the obstacle. It has to travel back and forth 200 meters, passing through 14 obstacles. Smoothly and quickly passing through obstacles is an important guarantee for completing the journey. Therefore, running on flat ground for the first 100 meters requires speed, ease, and effort. In the process of running between obstacles, there should be a step point adjustment stage, that is, after passing through obstacles, the step point should be adjusted well, and before passing through the next obstacle, the running speed should be slightly increased, with a clear rhythm, to achieve the goal of smoothly and quickly passing through obstacles. When all obstacles are passed, the race enters the finish line, demanding strength and carrying forward the spirit of tenacious struggle to reach the finish line. Hanzhong 400m Obstacle Equipment 400m Obstacle Training Equipment Armed 400m Obstacle

　　Composition, set at least 1

　　Manufacturer's process for 400 meter obstacle equipment:

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

　　A set of obstacle equipment with a thickness of 400 meters made of fir wood in the middle, Guizhou. Price: fire training, low pile net, single wooden bridge manufacturer

　　Stability is good, and a normal adult will not flip over when turning over. Fuzhou 400 meter obstacle equipment 400 meter obstacle training equipment 100 meter obstacle equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting.

　　Surface treatment of 400 meter obstacle equipment manufacturer: All steel parts are treated with primary treatments such as acid washing, phosphating, and sanding, and then sprayed with imported electrostatic epoxy powder for surface treatment. The coating thickness is 70-80um, and the pencil hardness reaches 3H+

　　Expansion equipment: Langmu covers an area of 400 meters in Guizhou. A set of obstacle equipment is available at a price. Fire training: Low pile net. Single wooden bridge manufacturer. 400 meter obstacle training method

　　100 meters: sprint 100 meters to the opposite Wuxi 400 meter obstacle standard 400 meter obstacle 100 meter obstacle equipment

　　Two hundred meters: through five step stakes, jumping deep pits, flying low boards, climbing high benches, crossing high and low platforms, climbing cloud ladders, climbing single wooden bridges, high board walls, and drilling wire mesh

　　Three hundred meters: jumping low pile net, high slab wall, drilling bridge pier, cloud ladder, high and low platform, drilling low slab wall, deep pit (2M), three-step pile

　　400m: 100m Sprint Return to Guizhou 400m Obstacle Equipment Set Price Fire Training Low Pile Net Single Wooden Bridge Manufacturer

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Tangshan A set of 400 meter obstacle equipment standard 400 meter manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price Tangshan One set of 400m Obstacle Equipment Standard 400m Manufacturer

AfterSalesService :

• 400 meter obstacle equipment