Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer The main frame of the 400m obstacle equipment is welded into an I-shaped base with 12 # channel steel, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over.

　　Surface treatment of 400m barrier equipment: all steel parts are subject to surface treatment after primary treatment such as pickling, phosphating, sanding, etc. The imported electrostatic epoxy based powder coating is used for surface treatment. The coating thickness is 70-80um, pencil hardness is up to 3H+, and the test object has passed the GB1771-91 36 hour salt spray test. The coating film has no change, and the single-sided corrosion at the grid is< 2mm. The product has the advantages of acid and alkali resistance, moisture and heat resistance, anti-aging, and beautiful appearance. It can be used indoors and outdoors in humid and acid rain environments, and the product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Structure of 400 meter obstacle equipment: Two supporting columns horizontally support a circular bar (with a constant diameter) to form a horizontal bar

　　The supporting column stands upright on the ground There is a chassis below

　　The 400 meter obstacle equipment uses four ropes (with a diameter of up to 1 centimeter) to pull the horizontal bar upright Four ropes are connected to four ground hooks on the ground

　　400 meter obstacle equipment size: The diameter of the horizontal bar is 2.8 centimeters with an allowable error of+-0.01 centimeters, the distance between two connection points is 240 centimeters with an allowable error of+-1 centimeter, the distance between the joints is at least 200 centimeters with an allowable error of+-1 centimeter, and the distance from the ground to the high-level of the horizontal bar is 275 centimeters with an allowable error of+-1 centimeter

　　Distance between ground hooks: allowable error+-5 centimeters for horizontal direction of 550 centimeters, allowable error+-5 centimeters for vertical direction of 400 centimeters. Function feature: adjustable, must be able to increase the height by 5 centimeters through height adjustment

　　The horizontal bar of 400 meter obstacle equipment must have elasticity Guaranteed not to break Elasticity does not only come from rods The equipment as a whole also has elasticity This is the floor hook Supporting pillars The installation and tension of steel ropes must strictly comply with the requirements The reason for ensuring uniform elasticity The pole and supporting column must be connected by a flexible joint To ensure effective elasticity The lever must allow for turning and sliding movements on it At the same time, it is not easy to slip The entire device must be stable When in use The supporting column cannot move or swing

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. 400 meter obstacle, 100 meter obstacle equipment, 300 meter obstacle equipment, physical training equipment, balance training single wooden bridge, single and double bars, high and low wall obstacle board, low pile net, high and low jumping platform, collapsed pile, wave wood, high and low jumping platform, horizontal ladder, tire wall, soft rope inclined ladder, fixed wheel, three person cooperation frame, turning flag and other obstacle equipment suitable for fire protection, navy, school training, etc. We sincerely welcome customers in need to consult and negotiate business! 400 meter obstacle, turning into the obstacle zone. The obstacle area twists back and forth for 200 meters, in sequence: five connected piles, wide trenches, low slabs, high benches, single wooden bridges, high slabs, and barbed wire. Take another turn, jump over the barbed wire fence, climb the high board, drill the bridge hole, go up the high platform, drill the low board hole, go down the deep pit, connect the three piles, then take another turn and run back to the starting point empty. There are a total of seven groups of obstacles, but the methods of crossing obstacles are different. This is a total of 14 obstacles.

　　400 meter obstacle passing through five step pile, jumping deep pit, flying low board, climbing high bench, climbing high and low platform, climbing cloud ladder, climbing single wooden bridge, high board wall, drilling wire mesh. 300 meters: jumping low pile net, climbing high board wall, drilling bridge pier, passing cloud ladder, climbing high and low platform, drilling low board wall, descending deep pit (2M), three-step pile. 400 meters: sprinting back for 100 meters

　　The enthusiasm of the 400 meter obstacle and the improvement of training efficiency. Recently, a certain unit has put basic physical fitness training on the training schedule, requiring grassroots battalions to focus on 400 meter obstacle training according to the requirements of team demonstration, regular practice, and monthly exams, so that officers and soldiers can overcome "obstacles" and enhance their physical fitness. Through concentrated learning and practice, officers and soldiers have realized the necessity and importance of practicing this subject.

　　The 400 meter obstacle is an important subject in the daily training of officers and soldiers. There are two common obstacles in our army: old and new, which are set according to different battlefield environments. Comrades who have relatively more exposure to the old 400 meter obstacle may be a bit unfamiliar with the new one, so here we will introduce the new obstacle - crossing the sea and landing on the island 400 meters.

　　400 meter obstacle trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane 3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards. 4. High board jumping platform horizontal ladder: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

　　Detailed specifications of 400 meter obstacle equipment; Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Xianyang 400m Obstacle Equipment Standard 400m Obstacle Manufacturer

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment