Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Xiamen 400m obstacle equipment standard 400m sea crossing and island landing equipment Guizhou 400m obstacle equipment set price Fire training Low pile net Single wooden bridge manufacturer

　　Physical allocation for 400 meter obstacle running. The 400 meter obstacle race requires running at a "uniform" speed to complete the distance. The 400 meter obstacle requires running 100 meters on flat ground before passing through the obstacle. It has to travel back and forth 200 meters, passing through 14 obstacles. Smoothly and quickly passing through obstacles is an important guarantee for completing the journey. Therefore, running on flat ground for the first 100 meters requires speed, ease, and effort. In the process of running between obstacles, there should be a step point adjustment stage, that is, after passing through obstacles, the step point should be adjusted well, and before passing through the next obstacle, the running speed should be slightly increased, with a clear rhythm, to achieve the goal of smoothly and quickly passing through obstacles. When all obstacles are passed, the race enters the finish line, demanding strength and carrying forward the spirit of tenacious struggle to reach the finish line.

　　Composition, set at least 1

　　Manufacturer's process for 400 meter obstacle equipment:

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

　　A set of obstacle equipment with a thickness of 400 meters made of fir wood in the middle, Guizhou. Price: fire training, low pile net, single wooden bridge manufacturer

　　Stability is good, and a normal adult will not flip over when turning over.

　　2. Paint (spray coating), process: There are two colors: camouflage and military green

　　Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting.

　　Surface treatment of 400 meter obstacle equipment manufacturer: All steel parts are treated with primary treatments such as acid washing, phosphating, and sanding, and then sprayed with imported electrostatic epoxy powder for surface treatment. The coating thickness is 70-80um, and the pencil hardness reaches 3H+

　　Expansion equipment: Langmu covers an area of 400 meters in Guizhou. A set of obstacle equipment is available at a price. Fire training: Low pile net. Single wooden bridge manufacturer. 400 meter obstacle training method

　　100 meters: sprint 100 meters to the opposite side

　　Two hundred meters: through five step stakes, jumping deep pits, flying low boards, climbing high benches, crossing high and low platforms, climbing cloud ladders, climbing single wooden bridges, high board walls, and drilling wire mesh

　　Three hundred meters: jumping low pile net, high slab wall, drilling bridge pier, cloud ladder, high and low platform, drilling low slab wall, deep pit (2M), three-step pile

　　400m: 100m Sprint Return to Guizhou 400m Obstacle Equipment Set Price Fire Training Low Pile Net Single Wooden Bridge Manufacturer

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. Detailed specifications of 400 meter obstacle board;

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line.

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick.

　　High platform; Height of 1.5 meters, length and width of 1 meter each.

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　The company passed 1SO900I,; 2001 Quality Management System Certification, 1SO14001 Environmental Management System Certification, OHS18001 Occupational Safety and Health Management System Certification, NSCC Certification, Chinese People's Financial Product Liability Underwriting Unit, Designated Inspection Unit of Quality Supervision and Testing Center, Member Unit of China Teaching Instrument and Equipment Industry Association, Member Unit of China Sports Products Federation and Product Quality Inspection Association, awarded multiple honors to [product], including main products [basketball hoop, fitness path, badminton tennis pole, track and field equipment, sponge mat gymnastics mat, dance pole, student physical fitness testing, school equipment, and various accessories of fitness equipment]!

　　Detailed specifications of 400 meter obstacle equipment; Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Xiamen 400m Obstacle Equipment Standard 400m Cross Sea Landing Equipment

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment