Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. The 400 meter obstacle course for crossing the sea and landing on the island is designed to simulate the actual combat environment of crossing the sea and landing operations, with a focus on improving the adaptability of individual soldiers to sea combat. Following the laws of physical training and the principle of system combination, it simulates the special states of loading, crossing, transfer, and beach landing to varying degrees, integrating collective ability, skills, and psychological training to meet the training needs of crossing the sea and landing operations. The venue adopts 4 turns, with a total of 10 projects, including the runway and obstacles set at intervals on the runway.

　　Now let's step into the university and get to know the 400 meter barrier for crossing the sea and landing on the island, helping everyone establish a clear impression.

　　Obstacle 1: Soft Bridge

　　Obstacle introduction: The soft bridge suspension is suspended in mid air, with a steep sloping bridge deck, simulating a floating bridge in real combat environments, and exercising the balance of the trainer's body.

　　Completion method: Run on the bridge and quickly pass through.

　　Tip: Lower your center of gravity and look straight ahead with both eyes; Step accurately and find the center line; Fast speed and steady body.

　　Obstacle 2: Spiral Ladder

　　Obstacle introduction: The spiral ladder consists of a rotating elevator, a circular platform, and a vertical pole, simulating a bumpy boat on the sea surface to exercise the stability of the trainer's movement.

　　Completion method: Quickly climb up the spiral ladder, travel around the platform once, and slide down from the middle vertical pole.

　　Tip guide: Hold both hands firmly, step steadily with both feet, and slide down with arms and feet against the vertical pole.

　　Obstacle 3: High and low horizontal beams

　　Obstacle introduction: The high and low crossbars are composed of four intersecting horizontal bars, simulating high and low obstacles on a ship and exercising the flexibility of the trainer.

　　Completion method: Bend down and pass through the low wood, and cross over and pass through the high wood.

　　Tip guide: Coordinate hands and feet, pay attention to connection.

　　Obstacle 4: Rope Net

　　Obstacle introduction: The rope net is an iron chain net suspended from the ground, with a horizontal bar at the top, which exercises the trainer's mental quality and overcomes the fear of heights.

　　Completion method: Climb from the bottom to the top, climb over the crossbar, grab the net and step on the node from the other side to land.

　　Tip guide: Hold onto the iron chain tightly with your hands and step firmly on the nodes with your feet.

　　Obstacle 5: Tire Climbing Platform

　　Obstacle introduction: The tire climbing platform consists of a suspension board, hanging tires, hemp rope, and soft ladder, etc., which exercises the trainer's ability to overcome obstacles in the air and improves body coordination.

　　Completion method: Quickly jump onto the tires one by one through the hanging board, climb to a high place, and use hemp rope or soft ladder to land.

　　Tip guide: Hands are faster than feet, grip firmly and step firmly; When sliding down, step on the rope with your feet first and alternate your hands downwards.

　　Obstacle 6: Swinging Platform

　　Obstacle introduction: The swinging platform consists of a platform and 9 staggered columns. During the movement, the platform swings left and right, simulating the shaking of a ship deck, and exercising the balance and stability of the trainer.

　　Completion method: Coordinate hands and feet, rotate the body back and forth, and pass through the platform.

　　Tip guide: Keep your body and legs close to the inside of the pillar, reach forward and grasp the pillar, and step forward with your legs.

　　Obstacle 7: Shaking the horizontal ladder

　　Obstacle introduction: The shaking horizontal ladder is composed of vertical poles, iron chains, and horizontal ladders. The height of the ladder poles is distributed, and the horizontal ladder shakes during the movement, which exercises the balance and coordination of the trainer and overcomes the fear of heights.

　　Completion method:

　　1. Grasp the crossbar, swing your body, cross the ladder, move your hands and feet alternately, and grab the crossbar to land.

　　2. Grasp the crossbar with both hands and move forward alternately.

　　Tip guide: Considering the physical exertion in the first 200 meters, it is recommended to use Method 1. Strong rhythm and steady movements.

　　Obstacle 8: Cross network

　　Obstacle introduction: The cross net is composed of elastic ropes, short poles, and floating bridges, simulating a flooded bridge deck to exercise the flexibility of the trainer.

　　Completion method: Lift your leg and quickly pass through.

　　Tip guide: Find the midline, turn your calves outward, lightly tap your toes, and maintain a steady pace.

　　Obstacle 9: Isolation Barrier Wall

　　Obstacle introduction: The isolation barrier wall is composed of a wall, hemp rope, and sliding rod. The wall has protrusions and grooves, which exercise the trainer's climbing ability.

　　Completion method: Grasp the hemp rope, climb up the wall with the help of protrusions or grooves, and scrape the wall from the other side to the ground.

　　Tip guide: "Point" should be firmly pressed, the center of gravity should be stable, and fear of heights should be overcome.

　　Obstacle 10: Simulating a Beach

　　Obstacle introduction: Simulating a beach paved with sand, simulating a beach landing, and exercising the trainer's beach sprinting ability.

　　Completion method: Take big strides and run through.

　　Tip guide: Try to swing your arms and sprint vigorously.

　　After watching these obstacle projects, I believe your heart is beating faster and you can't resist your motor nerves. You want to try it yourself. But be careful not to cross obstacles without protecting personnel, and always prioritize safety.

　　Detailed specifications of 400 meter obstacle equipment; Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle 400m Obstacle Board Training

　　It is a traditional sports training program in our army, which can develop comprehensive skills such as running, jumping, climbing, supporting, balancing, and crawling in action, improve physical fitness such as speed, endurance, coordination, and agility, cultivate brave, tenacious, and persevering willpower, and lay a good foundation for overcoming various artificial and natural obstacles during wartime.

　　The 400 meter obstacle board training is a physical training project that involves 8 sets of obstacles and 16 obstacles in a 400 meter round trip obstacle field. The sequence of passing is: running 100 meters flat, turning, crossing 3-step stakes, jumping over a low wall when crossing a trench, climbing over a high board and jumping platform, passing through a cloud ladder, passing through a single wooden bridge, climbing over a high wall, crawling through a low pile net, turning (returning), crossing a low pull net, climbing over a high wall, bypassing bridge columns, passing through a cloud ladder, crossing over a high board and jumping platform, drilling holes, jumping down and climbing up the trench, crossing a 5-step stake, turning, and reaching the 100 meter endpoint.

　　The 400 meter obstacle board training equipment mainly includes eight sets of obstacles, including cross piles, trenches, low walls, high board jumping platforms, cloud ladders, single plank bridges, high walls, and low pile nets. The quality of the 400 meter obstacle board training equipment is crucial for training, as it not only affects the effectiveness of daily training, but also relates to the personal rest of the trainees. Poor quality training equipment can easily cause accidents during use.

　　The manufacturer of 400 meter obstacle board training equipment for climbing frame training recommends Nanjing Dachuang Sports Goods Co., Ltd. to you.

　　Dachuang Sports Goods Co., Ltd. integrates design, production, and sales, and is a comprehensive company engaged in the research and manufacturing of sports goods in China.

　　The company's products include basketball stands, table tennis tables, field engineering construction, outdoor fitness paths, ball tables and their accessories, children's play equipment, etc; It is one of the companies in the East China region with comprehensive health and fitness equipment. The company has an after-sales service team and has set up product counters in multiple shopping malls across the country. In order to meet high-level needs, the company also collaborates with domestic and foreign sports brands to jointly create a health platform.

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Taizhou 400m Obstacle 400m Obstacle Training Equipment 400m Obstacle

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment