Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment
Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

Category:

Sports and leisure/Sports supporting products/Other sports supporting products

Model:

DC651

Brand:

none

Retail Price

2,800.00USD


重量

kg

  • Product Description
  • Description :

      (1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment 400m Obstacle Equipment is mainly used for officers and soldiers to master and improve skills such as running, jumping, climbing, support, balance, and crawling required for combat operations, enhance physical fitness such as speed, endurance, and sensitivity, cultivate brave and tenacious will, and lay a good foundation for overcoming various obstacles during wartime.

      The 400 meter obstacle course consists of the following seven obstacles: cross pile, trench, low wall, high board jumping platform, horizontal ladder, single wooden bridge, high wall, and low pile net

      400 meter obstacle equipment 1. Crossing stake: composed of 5 crossing stakes with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three spans on the right are 2.30 meters apart and 30 centimeters away from the centerline of the runway. The midpoint of one span is 5 meters away from the end line The midpoints of the two span stakes on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of one span stake is 6.15 meters away from the end line The cross pile is composed of wooden piles and cement 400 meter obstacle equipment 2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane 3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards. 4. High board jumping platform horizontal ladder: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart, made of bricks and cement The horizontal ladder is made of wood and supported by angle iron. It is equipped with at least 15 horizontal bars with a diameter of 3-4 centimeters, four columns with a diameter of 5 centimeters or more, and a height of 2.5 meters

      400 meter obstacle equipment 5. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined board length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes

      6. High wall: width, height of 2 meters each, thickness of 20 centimeters It is mainly composed of wooden boards 7. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

      400 meter obstacle equipment, training equipment, sports equipment, with 20 years of industry experience, our products are sold well in China

      Three hundred meter obstacle training ground, four hundred meter obstacle, parallel bars, horizontal bars, flying wheel (fixed roller), outdoor fitness equipment, comprehensive training equipment,

      Five types of training equipment, including 400 meter sea crossing and island landing, dog equipment, navy roller, hanging ladder, sentry post, customized training equipment, form run, punch target stand, sandbag, sandbag stand, hunter training equipment, American obstacle equipment, dog obstacle equipment, 500 meter obstacle, rope climbing pole combination, rope climbing pole customized equipment, wooden horse pedal, and more

      (2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

      (3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

      (4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

      (5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. Standard 400m obstacle specifications and dimensions, customized by 400m obstacle manufacturer

      The 400 meter obstacle training is a physical fitness training that causes great suffering for many soldiers. In this training, there are a total of 16 various obstacles, and it is generally not easy for people to complete the 400 meter obstacle. Those who have served in the military know that there is a time limit for 400 meter obstacle training, and the qualifying time is two and a half minutes. We know that it takes more than a minute to run 400 meters without obstacles, but how many people can guarantee to complete it in two and a half minutes in front of 16 obstacles? So the 400 meter obstacle is a terrifying presence for many soldiers, and there are also many instructors who use the 400 meter obstacle as one of the corporal punishment projects. Many people are also aware of the five kilometer load off-road, and relatively speaking, most soldiers would choose the five kilometer load off-road rather than the 400 meter obstacle. This shows how terrifying the 400 meter obstacle training is. The 400 meter obstacle is a traditional sports training project in our army. Through training, we can develop comprehensive skills such as running, jumping, climbing, supporting, balancing, and crawling in action, improve physical fitness such as speed, endurance, coordination, and agility, cultivate brave, tenacious, and persevering willpower, and lay a good foundation for overcoming various artificial and natural obstacles during wartime. Now let Brother Bing teach you how to pass the 400 meter obstacle. The 400 meter obstacle is a physical training project that involves 8 sets of obstacles and 16 obstacles in a 400 meter round trip obstacle field. The sequence of passing is: running 100 meters flat - turning - crossing 3 step stakes - jumping over a low wall when crossing a trench - climbing a high board jumping platform - passing through a cloud ladder - passing through a single wooden bridge - climbing over a high wall - crawling through a low pile net - turning (returning) - crossing a low pull net - climbing over a high wall - bypassing a bridge column - passing through a cloud ladder - crossing a high board jumping platform - drilling a hole - jumping down and climbing up a trench - crossing 5 step stakes - turning - reaching the 100 meter endpoint

      Detailed specifications of 400 meter obstacle equipment; Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

      Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

      A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

      High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Weinan 400m Obstacle 400m Obstacle Training Equipment, 100m Obstacle Equipment, and 400m Obstacle Equipment: Are anti-corrosion wood used? The 400m Obstacle Equipment is manufactured by a manufacturer, and the wooden product is made of laminated reinforced camphor pine wood (at least the wooden surface) or any other moisture absorbing material with the same wood function (impact strength, moisture absorption, neutral to magnesium oxide).

      Column bases, pillars, and bars: made of steel or cast iron. The entire product is processed by anti-corrosion glaze and electroplating spraying high-temperature spraying treatment on both the top and bottom. There will be no marks or scratches on the board.

      The joints of wood are made using ancient Chinese woodworking techniques, such as crescent moon carving and bamboo shoot carving.

      Steel parts:

      1. Uniform thickness and no hard edges;

      2. The quality and color of spray painting or plastic spraying are uniform and uniform, without bubbles, wrinkles, or dirt spots.

      3. No cracks, no scars, and no tortuosity;

      The overall product is sturdy and practical.

      High platform; Height of 1.5 meters, length and width of 1 meter each. Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

      Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

      Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

      single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

      The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

      High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

      Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

      400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

      1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Weinan 400m Obstacle 400m Obstacle Training Equipment 100m Obstacle Equipment

      2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

      The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

      Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

    AfterSalesService :

    Key words:
    • 400 meter obstacle equipment