A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang
A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

Category:

Sports and leisure/Sports supporting products/Other sports supporting products

Model:

DC651

Brand:

none

Retail Price

2,800.00USD


重量

kg

  • Product Description
  • Description :

      (1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang. The factory manufacturer of the 400 meter obstacle equipment will ship it directly

      Expansion equipment was already used in the field as early as World War II. Training with 400 meter obstacle equipment can exercise how to overcome fear, weakness, and tension under collective crisis pressure and clear personal responsibility, and establish the confidence of courage and victory. How to achieve organizational and personal goals at critical moments and occasions. At the same time, expanding equipment also plays an important role in the "sexual" cultivation of soldiers.

      The rule for the 400 meter journey is: the soldier starts from the starting point in a low position and lies prone, runs 100 meters in an empty position, and then turns to enter the obstacle zone. The quotation for training equipment in Lanzhou, Gansu Province includes a 200 meter turning point in the obstacle zone, consisting of five connected piles, wide trenches, low boards, high benches, single wooden bridges, high boards, and barbed wire. Take another turn, jump over the barbed wire fence, climb the high board, drill the bridge hole, go up the high platform, drill the low board hole, go down the deep pit, connect the three piles, then take another turn and run back to the starting point empty. Smoothly and quickly passing through obstacles is an important guarantee for completing the journey. Therefore, running on flat ground for the first 100 meters requires speed, ease, and effort. In the process of running between obstacles, there should be a step point adjustment stage, that is, after passing through obstacles, the step point should be adjusted well, and before passing through the next obstacle, the running speed should be slightly increased, with a clear rhythm, to achieve the goal of smoothly and quickly passing through obstacles.

      Our company's product sales outlets are located throughout the country. Our core products include 400 meter obstacle equipment, parallel bars, horizontal bars, gymnastics mats, basketball hoops, badminton and volleyball, table tennis tables, track and field equipment, outdoor fitness equipment, plastic field paving, artificial turf paving, etc.

      (2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

      (3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

      (4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

      (5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards. Guizhou 400 meter obstacle equipment set price, fire training, low pile net, single wooden bridge manufacturer

      Physical allocation for 400 meter obstacle running. The 400 meter obstacle race requires running at a "uniform" speed to complete the distance. The 400 meter obstacle requires running 100 meters on flat ground before passing through the obstacle. It has to travel back and forth 200 meters, passing through 14 obstacles. Smoothly and quickly passing through obstacles is an important guarantee for completing the journey. Therefore, running on flat ground for the first 100 meters requires speed, ease, and effort. In the process of running between obstacles, there should be a step point adjustment stage, that is, after passing through obstacles, the step point should be adjusted well, and before passing through the next obstacle, the running speed should be slightly increased, with a clear rhythm, to achieve the goal of smoothly and quickly passing through obstacles. When all obstacles are passed, the race enters the finish line, demanding strength and carrying forward the spirit of tenacious struggle to reach the finish line.

      Composition, set at least 1

      Manufacturer's process for 400 meter obstacle equipment:

      1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness.

      A set of obstacle equipment with a thickness of 400 meters made of fir wood in the middle, Guizhou. Price: fire training, low pile net, single wooden bridge manufacturer

      Stability is good, and a normal adult will not flip over when turning over.

      2. Paint (spray coating), process: There are two colors: camouflage and military green

      Polish both the wooden board and the main frame to ensure that there are no burrs on the main frame and wooden board, and that they are not easy to hurt hands. Apply surface spraying and painting.

      Surface treatment of 400 meter obstacle equipment manufacturer: All steel parts are treated with primary treatments such as acid washing, phosphating, and sanding, and then sprayed with imported electrostatic epoxy powder for surface treatment. The coating thickness is 70-80um, and the pencil hardness reaches 3H+

      Expansion equipment: Langmu covers an area of 400 meters in Guizhou. A set of obstacle equipment is available at a price. Fire training: Low pile net. Single wooden bridge manufacturer. 400 meter obstacle training method

      100 meters: sprint 100 meters to the opposite side

      Two hundred meters: through five step stakes, jumping deep pits, flying low boards, climbing high benches, crossing high and low platforms, climbing cloud ladders, climbing single wooden bridges, high board walls, and drilling wire mesh

      Three hundred meters: jumping low pile net, high slab wall, drilling bridge pier, cloud ladder, high and low platform, drilling low slab wall, deep pit (2M), three-step pile

      400m: 100m Sprint Return to Guizhou 400m Obstacle Equipment Set Price Fire Training Low Pile Net Single Wooden Bridge Manufacturer

      Detailed specifications of 400 meter obstacle equipment; A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

      Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

      A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

      High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. A set of 400 meter obstacle equipment in Shijiazhuang. 400 meter obstacle training equipment for crossing the sea and landing on islands. The 400 meter obstacle refers to a runway composed of eight sets of obstacles, including cross piles, trenches, low walls, high board jumping platforms, cloud ladders, single plank bridges, high walls, and low pile nets. Because we have to pass through obstacles once in both directions, it should be said that Cheng has to pass through obstacles 16 times. The sequence of passing is: 100 meters run → turn around the flag → cross the three-step pile → cross the trench → jump over the low wall → pass through the high board jumping platform → pass through the cloud ladder → pass through the single wooden bridge → climb over the high wall → drill and climb the low pile net → turn around the flag and return → cross the low pile net → climb over the high wall → turn around the column under the single wooden bridge → pass through the cloud ladder → pass through the high board jumping platform → drill through the hole → jump down and climb up the trench → cross the five step pile → turn around the flag → run 100 meters to the finish line. There are a total of 14 obstacles, mainly including training facilities such as cross piles, trenches, low walls, high board jumping platforms, single plank bridges, and high walls The flagpole is 1.5 meters high and has a diameter of about 5 centimeters. It consists of 5 cross stakes with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two span piles on the left are 2.3 meters apart and 0.6 meters away from the centerline of the runway. The midpoint of the first span pile is 6.15 meters away from the end line. Specifications for a single wooden bridge, dimensions of 5 * 0.25 * 0.23 meters, parameters for a single wooden bridge, price for a single wooden bridge, manufacturer of a single wooden bridge, length of 5 meters, height of 1.3 meters, diameter of 20-25 centimeters, width of the bridge plane of 10 centimeters, length of the inclined plate of 2 meters, and width of 20 centimeters. The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes. High wall, low wall, high board jumping platform, single plank bridge, ground pile net

      High platform; Height of 1.5 meters, length and width of 1 meter each. A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

      Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

      Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

      single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

      The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

      High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

      Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

      400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

      1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. A set of 400 meter obstacle equipment and 400 meter obstacle training equipment for crossing the sea and landing on islands in Shijiazhuang

      2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

      The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

      Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

    AfterSalesService :

    Key words:
    • 400 meter obstacle equipment