Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

Description :

　　(1) 400 meter obstacle equipment welding: China's advanced imported two protection welding machine is used for carbon dioxide protection welding, with higher welding strength than ordinary welding, ensuring the firmness and aesthetics of the welding part; Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle 400m Obstacle Equipment Manufacturer, 400m Obstacle Price, 400m Obstacle Equipment To promote the enthusiasm of officers and soldiers for 400m obstacle training and improve training efficiency. Recently, a certain unit has put basic physical fitness training on the training schedule, requiring grassroots battalions to focus on 400 meter obstacle training according to the requirements of team demonstration, regular practice, and monthly exams, so that officers and soldiers can overcome "obstacles" and enhance their physical fitness. Through concentrated learning and practice, officers and soldiers have realized the necessity and importance of practicing this subject.

　　Through a single plank bridge

　　During the observation, detailed demonstrations and explanations were given on more than 10 small details, including the precautions, pre run exercises, action essentials, and protective measures for the 400 meter obstacle. Timely corrected the problems and incorrect methods in the 400 meter obstacle. Basic physical fitness is a requirement that everyone must meet, and 400 meter obstacle training is just a lever to solidify their physical fitness foundation. It is reported that each battalion has implemented weekly armed 5-kilometer training and monthly 20 kilometer combat physical training in accordance with the instructions of the higher authorities. A "combination punch" that enhances the basic physical fitness of officers and soldiers is promoting them to stride forward on the road of strengthening their basic physical fitness.

　　Passing through the cloud ladder

　　Through practical confrontation and evaluation, the 400 meter obstacle crossing action and obstacle crossing skills were demonstrated to all observers. In the exciting competition among the contestants from each camp, they flew over obstacles and took only 1-2 seconds to leap over each obstacle. Their agile figures amazed the observers.

　　Through a single plank bridge

　　When I first joined the army, I felt that this subject was difficult and I had a certain degree of fear. However, through the demonstration teaching and personal experience just now, I have basically mastered the relevant action essentials for crossing obstacles. Watching the demonstration squad leader quickly cross various obstacles, I think in the near future, I can also be like them. "Private Pan Junkang told me after the training ended.

　　(2) Shot blasting rust removal: Physical and mechanical rust removal is used on the surface, which not only removes rust but also increases the surface area of the equipment, laying the foundation for strengthening the plastic powder adsorption ability in subsequent processes. This is an unparalleled advantage of acid pickling rust removal;

　　(3) Electrostatic spraying: Advanced electrostatic spraying equipment and advanced environmentally friendly electrostatic powder spraying technology are used to spray the surface of the equipment, greatly improving its weather resistance and impact resistance. The color remains unchanged for eight years, and surface shot blasting hardening and purification green environmental protection technology are adopted in the front sequence, making the surface quality of the product reach the international advanced level and more environmentally friendly than traditional phosphating treatment process.

　　(4) Connection parts of 400 meter obstacle equipment: All connection parts are fastened with specially designed anti loosening and anti-theft screws, ensuring that the equipment is protected from human damage and normal use, and also preventing scratches from water chestnuts during use. The surface meets the requirements of commonality, safety, and image. Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　(5) Our products are designed and produced strictly in accordance with the national standard - "General Requirements for Fitness Equipment Safety". During the production process, we strictly control the quality to ensure that each product leaves the factory with a qualified rate, pursue zero defects in products, and achieve industry standards.

　　Detailed specifications of 400 meter obstacle equipment; Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　Plum Blossom Pile; Composed of 5 cross piles with a diameter of 0.3 meters and a height of 0.1 meters above the ground. The midpoints of the three cross piles on the right are 2.3 meters apart, 0.3 meters away from the centerline of the runway, and 5 meters away from the end line. The midpoints of the two cross piles on the left are 2.3 meters apart, 0.6 meters away from the centerline of the runway, and 6.15 meters away from the end line. Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　A low wall; Width of 2 meters, height of 1.1 meters, and thickness of 0.2 meters. The hole is 0.5 meters wide, 0.4 meters high, and its lower edge is 0.6 meters above the ground. It is located on the left side of the low wall.

　　High board; 1.8 meters high, 2 meters long, 0.5 meters wide, and 0.05-0.08 meters thick. Jiuquan 400m obstacle training obstacle equipment armed 400m obstacle 400m obstacle 400m obstacle equipment product standard

　　Product standard for 400 meter obstacle equipment

　　400 meter obstacle course (1 set) specifications

　　1. Cross pile: composed of 5 cross piles with a diameter of 30 centimeters and a height of 10 centimeters above the ground The midpoints of the three cross stakes on the right are 2.30 meters apart, 30 centimeters away from the centerline of the runway, and 5 meters away from the end line The midpoints of the two spans on the left are 2.30 meters apart and 60 centimeters away from the centerline of the runway. The midpoint of the first span is 6.15 meters away from the end line The cross pile is composed of wooden piles or cement

　　2. Trench: 2 meters in length, width, and depth each The ditch wall should be a vertical plane

　　3. Low wall: 2 meters wide, 1.1 meters high, and 20 centimeters thick The hole is 50 centimeters wide, 40 centimeters high, and its lower edge is 60 centimeters above the ground. It is located on the left side of the low wall The low wall is mainly composed of wooden boards

　　4. High board jumping platform: (The high board is 1.80 meters high, 2 meters long, 50 centimeters wide, and 5-8 centimeters thick.) The high platform is 1.5 meters high, 1 meter long, and 1 meter wide Low platform height, length, and width each 1 meter High board, high platform, low platform spaced 1 meter apart

　　5. The horizontal ladder is 5.1 meters long, 0.59 meters wide, and 2.4 meters high. It is composed of steel garden pipes with a diameter of 3-4 centimeters, and the horizontal bars are spaced 0.5 meters apart. The four columns have a diameter of over 5 centimeters and a height of 2.5 meters

　　6. Single plank bridge: 5 meters long, 1.3 meters high, diameter 20-25 centimeters, bridge plane width 10 centimeters, inclined plate length 2 meters, width 20 centimeters The columns under the bridge are spaced 1-1.30 meters apart and should be painted with red and white colors, mainly composed of steel pipes

　　7. High Wall: Width, height of 2 meters each, thickness of 20 centimeters It is mainly composed of wooden boards Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　8. Low pile net: It consists of 12 columns arranged in two rows, with a row spacing of 2 meters and a spacing of 1 meter. The piles are 50 centimeters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of piles to form a pile net. The ground below the net should be made of a loose and soft sand layer The column is composed of steel pipes

　　9. Turning flag: The flagpole is 1.5 meters high and has a diameter of about 5 centimeters.

　　High platform; Height of 1.5 meters, length and width of 1 meter each. Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　Low platform; Height, length, and width are each 1 meter. High board, high platform, and low platform are spaced 1 meter apart.

　　Horizontal ladder; Length of 5 meters, width of 0.6 meters, height of 2.4 meters, horizontal bars of 0.03-0.04 meters, with a span of 0.5 meters between horizontal bars, and a distance of 0.3 meters from the high board jumping platform.

　　single-plank bridge; Length of 5 meters, bridge deck width of 20 centimeters, thickness of 13 centimeters, height of 1.3 meters, inclined plate length of 2 meters and width of 0.2 meters

　　The columns under the bridge should be spaced 1-1.3 meters apart and painted with alternating red and white colors.

　　High walls; Width and height are 2 meters each, and thickness is 20 centimeters.

　　Low pile net; Twelve vertical stakes are arranged in two rows, with a spacing of 2 meters and a spacing of 1 meter. The stakes are raised 0.5 meters above the ground, and elastic materials are used to straighten the horizontal lines between each pair of stakes to form a pile network. The ground below the network should be covered with a soft sand layer. Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　400 meter obstacle equipment manufacturer tells you: the process of making 400 meter obstacle equipment

　　1. The main frame is welded with 12 # channel steel to form an I-shaped base, which is firmly welded and has a standard right angle. On the basis of the I-shaped base, weld channel steel and square tube as columns, and weld four triangular brackets near the column feet as supports to ensure stability and firmness. The middle is made of cedar wood, which has good thickness stability and can prevent a normal adult from tipping over. Jiuquan 400m Obstacle Training Obstacle Equipment Armed 400m Obstacle

　　2. Paint (spray coating), process: There are two colors: camouflage and military green. The wooden board and main frame are polished to ensure that there are no burrs on the main frame and wooden board, which is not easy to hurt hands. Surface spraying and spraying are carried out.

　　The surfaces of all steel parts of 400m barrier equipment are subject to primary treatment such as pickling, phosphating and sanding, and then the imported electrostatic epoxy based powder is applied for surface treatment. The product has the advantages of acid and alkali resistance, damp heat resistance, aging resistance, and beautiful appearance. It is suitable for wet and acid rain environments, and can be used indoors and outdoors. The product coating formula does not contain toxic elements, so as to avoid damaging the health of users.

　　Anqing Practice Competition Training Equipment Mobile 400m Obstacle Equipment Expansion Psychological Behavior Cloud Ladder Price

AfterSalesService :

• 400 meter obstacle equipment