Features of foam fire monitor Shandong factory direct sales of industrial fire monitor

Description :

　　Features of the equipment

　　The foam monitor is mainly composed of handle, base, water inlet pipe, swivel, locking device, foam injection system and rotating mechanism. It has good performance in the pressure range of 8-10MPa. It can spray not only foam but also water. When spraying air foam, adjust the proportional mixer to the flow value of the monitor before use.

　　3. Use and maintenance

　　1. Fire cannons should be used within the specified pressure range.

　　2. The integrity and operational flexibility of the cannon should be regularly checked. If fasteners are found to be tight or deformed, they should be repaired in a timely manner to keep the cannon in good working condition.

　　3. The ball valve on the fire monitor should be opened or closed within the specified pressure range to avoid damage and deformation of the ball valve and sealing components.

　　4. After each use, water should be sprayed for a period of time, and then the water inside the fire monitor should be drained. In cold winter areas, it is even more important to ensure that there is no accumulated water inside the fire monitor to prevent it from freezing and damaging.

　　5. Clean water should be used to avoid damaging the ball valve or blocking the fire monitor.

　　6. The rotating parts of the fire monitor should be lubricated regularly to ensure flexible rotation.

　　7. When spraying, it is strictly prohibited to stand at the muzzle of the fire monitor.

　　8. Fire cannons cannot be used to extinguish fires caused by live electrical equipment to avoid electric shock.

　　9. Usually, a quick detachable rain cover can be used to cover it

AfterSalesService :

• fire monitor