Fire fighting equipment product Cubic foam tank Large model foam tank Our foam tank manufacturer supplies spot

Description :

　　PHYM foam tank pressure type foam proportioning device (PHYM10/20/30/40/50/60/80)

　　Vertical/bedroom foam tank foam proportioning device foam spray system foam liquid storage tank diaphragm foam tank

　　The flow rate and volume of the product can be produced according to the requirements. The product with the model number ZP32/15 ZP24/15 on the market belongs to the same category as the PHYM series, but the manufacturer's name is different.

　　According to the way of filling foam liquid, it can be divided into type and ordinary type; According to the installation method of the tank, it can be divided into two forms: horizontal and vertical. The mixing ratio of foam liquid is generally 3% or 6%, and the standard mixed liquid flow

　　Quantity 32-160L/S. The working pressure range is 0.6-1.2Mpa. The volume of foam liquid storage tank is 500-15000L. Different specifications can be matched at will

　　1、 Structure

　　This series of products mainly consists of tanks, proportional mixtures, inlet pipes, outlet pipes, drainage valves, discharge valves, safety valves, and pressure gauges. Each pipeline is equipped with a valve

　　Pressure gauges are installed on the doors and inlet pipelines, and are installed inside the tank. The inner cavity and tank cavity are independent of each other.

　　2、 Working principle

　　The pressure water enters the tank through the water pipe, and produces pressure extrusion to extrude the foam liquid through the liquid outlet pipe, so that the foam liquid is automatically mixed with the water in the proportioner in a certain proportion

　　The mixed liquid flows through the air foam generator and foam gun (monitor) to eject foam for fire extinguishing.

　　3、 Main purpose

　　This series of products is widely used in oil depots, petroleum, chemical, natural gas, power plants, textile cotton and linen, docks, gas stations, warehouses, high-rise buildings, fuel boilers, underground garages and other fields

　　So.

　　Foam fire extinguishing device is a new and efficient fire fighting product specially developed for important places such as garage, parking lot, fuel boiler room, etc.

　　The key component of the system, the self-adjusting foam proportioner, is a technological innovation of foam fire extinguishing equipment. It can maintain a certain mixing ratio over a large flow range, and with the addition of water

　　The film foam extinguishing agent and its protective film are suitable for non aspirating foam spraying devices, making the system have the following remarkable characteristics:

　　(1) Foam extinguishing agent has film forming property and film self-healing property. Strong resistance to reignition;

　　(2) Foam liquid can be stored for 20 years without deterioration. Generally, foam concentrate can only be stored for 2 years;

　　(3) High firefighting effectiveness. 2~3 times of general foam extinguishing agent;

　　(4) Applicable to non aspirating foam injection device;

　　(5) Suitable for foam mixture with large flow range and accurate mixing ratio, suitable for 3% and 6% foam solutions;

　　(6) Low pressure loss;

　　(7) Flexible movements. Belonging to mechanical transmission;

　　(8) Corrosion resistance. The components are made of stainless steel and copper alloy;

　　(9) Foam liquid storage tank is built in to isolate water and foam liquid, which can be used continuously for many times;

　　(10) Can be used in conjunction with automatic sprinkler fire extinguishing systems and can achieve automation; (11) The supply of foam liquid is realized by water source pressure, without additional foam power source;

　　(12) Suitable for the renovation of automatic sprinkler fire extinguishing systems. Only foam proportioner and foam concentrate tank need to be added.

AfterSalesService :

• foam canister