The manufacturer supplies PHYML foam fire extinguisher cubic foam tank price spot sale fire extinguisher

Description :

　　The PHYML series pressure type proportioning device produced by Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. is called vertical foam tank for short. It is produced in strict accordance with national standards, with advanced technology, mature technology, complete models and stable performance. The PHYML series pressure type proportioning device is suitable for all kinds of foam liquid with a mixing ratio of 3% or 6%.

　　The PHYML series pressure type proportioning device for storage tanks adopts a combination of storage tanks and proportioning mixers, consisting of a tank body (ordinary or diaphragm type), a mixer assembly, an inlet pipeline assembly, an outlet pipe assembly, a discharge pipe assembly, etc.

　　When the pressure water of the fire pump enters the proportioner along the water supply pipe, a small part of the pressure water flows into the foam concentrate storage tank through the water inlet pipe, and the foam in the tank (or diaphragm)

　　Hydraulic outlet: foam liquid enters the pressure proportioner through the outlet pipe, forms a mixture with water in the specified proportion in the mixer and flows out of the mixer, and then is sent to the foam production equipment through the mixture pipe, where foam is sprayed to extinguish the fire. The device is set to automatically release pressure when the water pressure exceeds 1.2 MPa to ensure the safety of the device.

　　Ordinary type:

　　Since the overflow ring is installed above the tank, the pressure water flowing into the tank along the water inlet pipeline can slowly flow out from the top of the tank, and the water and foam liquid will not be rapidly stirred, so the lower part of the water in the foam agent with large specific gravity and water can be kept to meet the requirements of the proportioner to mix foam liquid and water in proportion.

　　Diaphragm type storage tank:

　　Since the storage tank is equipped with a high-strength rubber film, the foam concentrate stored during use will not contact with water, and the remaining foam concentrate after each use will not become invalid. In addition, the rubber membrane with stable performance can also store various light water foam stock solutions.

　　The PHYML series pressure type proportional mixing device for storage tanks produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. is divided into membrane type and ordinary type according to the filling method; According to the placement method of the tank, it can be divided into two forms: horizontal and vertical. The mixing ratio of foam is generally 3% or 6%, and 8% mixed liquid can also be provided for medium expansion foam fire extinguishing system. The mixed liquid flow rate of the device is 32-160L/S, and the storage tank capacity is 1000-15000L with different specifications. According to the required mixed liquid flow and foam injection time, the proportional mixer and foam tank can be arbitrarily combined into a series of products to meet the needs of engineering applications.

　　 Installation precautions:

　　1. The pressure type foam proportioning device of PHYML series storage tank shall be firmly fixed on the concrete foundation with anchor bolts according to the installation dimensions of this manual. The device is installed indoors.

　　2. The inlet and outlet pipelines are connected according to the size of the inlet and outlet flanges of this device.

　　3. The length of the drainage pipe is determined on-site based on existing building facilities, sewer locations, and other factors.

　　4. After installation, a system sealing test should be conducted. There should be no leakage in the storage tank and pipeline, and the safety valve should not be activated first.

　　 maintenance and upkeep

　　1. Before use, check whether the flange cover and connecting pipe flange on the "foam tank filling port" are sealed and whether various valves are closed.

　　2. After each use, the storage tank and pipeline must be rinsed clean with clean water, and the inner and outer surfaces must be repainted and treated for corrosion prevention.

　　3. When filling foam liquid, the tank shall be kept clean, and shall not be mixed with oil or other foam liquid, and shall not be mixed with aging foam liquid. The model of foam liquid shall not be wrong.

　　4. Foam concentrate should be kept away from direct sunlight and stored in a place with small temperature difference. Direct contact with air should be minimized. Any foam liquid stored beyond the validity period shall be sampled and inspected before use, and can be used only after it is qualified. The invalid foam liquid shall be replaced in time.

　　5. Storage tanks equipped with membranes should undergo a leak test every six months. The test method is to open the drain valve D, if there is foam leakage, it is proved to be damaged, and it should be repaired or replaced in time.

　　6. When replacing the foam liquid, a simulation test shall be carried out on the fire extinguishing system to check whether the working conditions of the proportional mixing device, foam generator and other equipment are normal and reliable. If there is any abnormality, it shall be repaired in time.

　　7. When replacing the invalid foam solution, the device should be thoroughly cleaned. The cleaning method is:

　　① First, open the bottom valve E to drain the expired foam liquid.

　　② Close valve D and fill it with clean water from the filling port to clean the inner surface; Then open valve E, connect compressed air from valve C to extrude foam liquid, continue to blow with compressed air for 30 minutes, thoroughly dry the water inside, and refill foam liquid.

　　8. In actual use, the storage tank must be filled with foam liquid.

　　Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. mainly produces foam tanks (pressure type proportional mixing device), fixed fire monitors, fire water monitors, fire turrets, low expansion foam generators, foam water dual-use monitors, foam hydrants, ground fire hydrants, ground quick opening pressure regulating fire hydrants, foam guns, mobile foam fire extinguishing devices, mobile fire monitors, remote control electric fire monitors, closed foam water sprinkler fire extinguishing devices, mobile foam tanks (semi fixed foam fire extinguishing devices), including foam fire extinguishing equipment, water fire extinguishing equipment, automatic fire extinguishing equipment, sprinkler cooling fire extinguishing system and fire fighting equipment accessories, which meet the market demand.

　　Focus on fire protection, production, and provide customers with a good product experience; It is the tireless pursuit of Dongyue firefighters.

　　The fire protection products produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. are widely used in industrial fire protection in public places and fire departments such as PetroChina, Sinopec, CNOOC, shipbuilding, mobile communication, tunnel transportation, tobacco, electricity, airports, shopping malls, etc.

　　All products of the company have not only obtained certification from the State Administration of Quality Supervision, Inspection and Quarantine, China Fire Products Qualification Assessment Center, but also "3c" quality certification; We have also obtained ISO9001 international quality management system certification.

　　Shandong Dongyue adheres to the professional spirit of practical innovation, upholds the concept of "honesty, trustworthiness, and win-win cooperation", and wholeheartedly provides excellent services to domestic and foreign customers. We warmly welcome friends from all walks of life to visit, guide and negotiate business.

　　Shandong Dongyue sincerely joins hands with our customers to create a brilliant tomorrow!

AfterSalesService :

• PHYML foam fire extinguisher supplied by the manufacturer