Industrial vertical foam tank price model Operating conditions of pressure type proportioning device

Description :

　　The PHYML series pressure type proportioning device produced by Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. is called vertical foam tank for short. It is produced in strict accordance with national standards, with advanced technology, mature technology, complete models, stable performance, safety and reliability, and high fire extinguishing efficiency. The PHYML series pressure type proportioning device is applicable to all kinds of foam liquid with a mixing ratio of 3% or 6%; The mixed liquid flow is 24-80L/S, and the volume of foam tank is 1000L-3000L.

　　The usage conditions of pressure type proportional mixing device:

　　1. The pressure of the fire pump matched with the mixing device must meet the requirements of the inlet working pressure of the mixer.

　　2. The working pressure range of the device is 0.6~1.2MPa, which cannot be used beyond the specified range of use, otherwise the mixing ratio will be affected and the quality of foam will be reduced.

　　3. The pressure used by the mixing device within the calibrated working pressure range depends on the working pressure of the matched foam extinguishing equipment and the magic resistance loss of the equivalent length of the pipeline.

　　4. In standby mode, all valves in the mixture should be closed.

　　Fire safety inspection content:

　　1. The rectification of fire hazards and the implementation of preventive measures.

　　2. Safety evacuation routes, evacuation signs, emergency lighting, and safety exits.

　　3. Fire truck access and fire water source situation.

　　4. Whether the fire-fighting facilities, equipment, and fire safety signs are in place, complete, and effective; Fire extinguishing equipment configuration and effectiveness.

　　5. Whether there are any violations of fire and electricity usage.

　　6. The mastery of fire safety knowledge among key workers and other employees.

　　7. On duty and management status of personnel in key fire safety areas.

　　8. The implementation of fire and explosion prevention measures for flammable and explosive dangerous goods and places, as well as the fire safety situation of other important materials.

　　9. The fire prevention day inspection results of the safety management departments of each unit.

　　10. Whether the normally closed fire door is in a closed state and whether there are items piled up under the fire shutter that affect its use.

AfterSalesService :

• Industrial vertical foam tank