Manufacturer's direct supply of above ground fire hydrants, outdoor fire hydrants, SSFT model, antifreeze fire hydrants, price

Description :

　　The SSFT series outdoor quick opening pressure regulating, anti freezing and anti-collision fire hydrants produced by Dongdongyue Crane Fire Equipment Manufacturing Co., Ltd. have been improved on key parts based on ordinary hydrants, greatly enhancing their performance and applicability. This type of fire hydrant has stable and reliable performance, simple and flexible operation, easy maintenance, and can achieve rapid opening and pressure regulation to meet the needs of various fire extinguishing places. The product can be widely used in municipal engineering, enterprises and institutions in various industries, especially in various levels and types of fire prevention units such as petroleum, chemical, grain storage and wood processing, and can be used with confidence in cold northern regions.

　　The SSFT series above ground fire hydrants produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. include three models: SSFT100/65-1.6, SSFT150/65-1.6, and SSFT150/80-1.6; There are two types of interfaces: 65 * 2 and 80 * 2, and the inlet diameter is divided into two types: 100/150.

　　Shandong Dongyue Crane and Fire Fighting Equipment Manufacturing Co., Ltd. reminds you to pay attention to the following matters during the use and maintenance of above ground fire hydrants:

　　1. Regularly inspect the fire hydrant, check the opening size of the cover, remove dirt, check if the seal is intact, and repair any paint peeling.

　　2. Check and clean up any obstacles to the fire hydrant.

　　3. Fire hydrants are usually closed, and a special wrench should be used to turn them on. After each use, a drainage valve should be used to drain the remaining water to prevent freezing and damage to the hydrant body. Especially in severe winter, attention should be paid to cold prevention, and the fire hydrant should be closed to prevent freezing and cracking of the hydrant body

　　4. When closing the fire hydrant, if it is not tightly closed, it should be loosened several times and rinsed with clean water before closing. It is strictly prohibited to close it forcefully or damage the components of the hydrant body

AfterSalesService :

• Manufacturer's direct supply of above ground fire hydrants