Advantages of foam fire hydrant Model of ground fire hydrant in Dongyue, Shandong foam fire equipment manufacturer
Category:
Security/Firefighting equipment/Other fire-fighting equipment
Model:
PS100-65*2
Brand:
Eastern Mountain
Retail Price
650.00USD
重量
kg
- Product Description
-
Description :
The PS150/100-65 * 2 foam fire hydrant produced by Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. has two outlets with a diameter of 65mm, and the liquid inlet has a diameter of 100/150.
Foam fire hydrant is one of the important devices in the foam fire extinguishing system, especially suitable for the production, storage and use of large areas of flammable liquids and flammable liquids with fire hazards. Foam fire hydrant is mainly composed of flange, cylinder, ball valve, internal connection, fire pipe thread and end cover.
Features of foam fire hydrant: quick opening and closing, light weight, which is a new creative improvement and enhancement based on the traditional fire hydrant. With the valve plate seal, you can rely on the pressure seal of the medium itself. The higher the pressure, the better the seal. Especially suitable for foam fire lines, a good lubrication chamber is designed: the main components are made of highly corrosion-resistant materials, and the main components are located in the oil tank, which can always be fully lubricated. Long term use and maintenance will not rust or get stuck. Its foam mixture switch adopts stainless steel ball valve to ensure free opening.
The outlet diameter of the fire hydrant shall not be less than 100mm. With the increase of urban buildings and population density, the difficulty of extinguishing fires has increased. In order to ensure the water pressure and quantity requirements for extinguishing fires, it is necessary to ensure that at least one outlet diameter of the fire hydrant is not small, with a diameter of not less than 100; mm。
The opening and closing direction of the fire hydrant should be uniform, both clockwise and counterclockwise. The screw rod should be made of stainless steel, and the sealing cup should be made of EPDM rubber or nitrile rubber. The anti-corrosion inside the cavity should meet the hygiene standards of drinking water and be consistent with the requirements of the valve.
AfterSalesService :
Key words:- Advantages of foam fire hydrant
More Products
