Dongyue ground anti freezing fire hydrant, outdoor pressure regulating fire hydrant manufacturer, in stock fire hydrant models, all available

Description :

　　The SSFT series above ground fire hydrants produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. have three signals: SSFT100/65-1.6, SSFT150/65-1.6, and SSFT150/80-1.6. There are two types of interfaces to choose from: 65 and 80, and two types of inlet diameters: 100 and 150.

　　The SSFT series above ground fire hydrant produced by Shandong Dongyue Crane and Fire Equipment Manufacturing Co., Ltd. has been improved in key parts on the basis of ordinary fire hydrants, making it have the following four characteristics different from ordinary fire hydrants:

　　1. Quick switch; This product adopts a cam type lifting valve stem different from ordinary bolts (ordinary bolts have a spiral valve stem), which can be completely closed or opened by simply rotating the wrench 4/5 turns.

　　2. Voltage regulation and stabilization function;

　　3. Anti freezing function;

　　4. Prevent functionality.

　　Use and maintenance

　　1. Regularly inspect the fire hydrant, check the opening size of the cover, remove dirt, check if the seal is intact, and repair any paint peeling.

　　2. Check and clean up any obstacles to the fire hydrant.

　　3. Fire hydrants are usually closed, and a special wrench should be used to turn them on. After each use, a drainage valve should be used to drain the remaining water to prevent freezing and damage to the hydrant body. Especially in severe winter, attention should be paid to cold prevention, and the fire hydrant should be closed to prevent freezing and cracking of the hydrant body

　　4. When closing the fire hydrant, if it is not tightly closed, it should be loosened several times and rinsed with clean water before closing. It is strictly prohibited to close it forcefully or damage the components of the hydrant.

AfterSalesService :

• Dongyue ground antifreeze fire hydrant