Fire foam fire extinguishing tank pressure type foam fire extinguishing device proportion mixing foam tank provided by the manufacturer

Description :

　　The pressure type foam proportional mixing device is a common foam extinguishing equipment at present. The pressure type foam proportioning device is easy to install, use and maintain, with excellent built-in corrosion resistance, relatively economical cost, stable and reliable performance, and is especially suitable for medium and small flow foam fire extinguishing systems. Mainly applicable to places where flammable or combustible liquids are produced, stored, transported, and used; Fire hazard areas such as petrochemical enterprises, oil depots, loading and unloading docks, ship docks, oil extraction platforms, aircraft hangars, and automobile garages.

　　The pressure type foam proportioning device can be divided into horizontal, vertical, single proportioning mixer, double proportioning mixer, etc. according to the structure type, and users can choose according to the actual configuration needs and the location of the installation space.

　　The PHYM series pressure type proportioning device produced by Shandong Dongyue Crane Fire Fighting Equipment Manufacturing Co., Ltd. is composed of foam liquid storage tank, pressure type proportioner, safety valve, control valve and some auxiliary parts. When the fire pressure water flows through the equipment, the proportional mixer divides its proportion, and a small part of the water flows into the interlayer of the foam liquid storage tank. The replaced foam liquid is mixed with the fire water of the other main pipes to form a certain proportion of foam liquid mixture, which is delivered to the foam generating equipment. PHYM series pressure type proportional mixing device is applicable to all kinds of foam liquid with mixing ratio of 3% and 6%.

　　Filling method of foam concentrate

　　Close all valves, open two exhaust valves, fill 1/3 to 1/2 of the tank water between the tank and the tank through the water inlet pipe and the drain port, then open the liquid filling port, insert an inch rubber pipe from the liquid filling port to the tank bottom, inject foam extinguishing agent into the tank through the crossover pipe, open the drain valve after water is discharged from the exhaust port, and drain water at a flow similar to the flow of foam liquid filling until the foam liquid is fully filled. After filling is completed, close the filling port and drainage valve, open the inlet valve, and slowly fill the space between the tank and the tank with water until water flows out from the exhaust port. Close the exhaust valve and inlet valve, and then rinse the scattered fire extinguishing agent outside the device with clean water.

　　maintenance

　　After the installation and acceptance of the device, there should be full-time or part-time firefighters to inspect, maintain and upkeep the device:

　　1. Regularly inspect the storage tank and proportioner every month to ensure that there are no leaks, rust, mechanical damage, etc;

　　2. Test the foam liquid in the tank every half a year to ensure that the chemical composition and performance of foam liquid meet the standard requirements;

　　3. Open the ball valve of the level gauge to observe the level of foam. After observation, close the ball valve of the level gauge in time.

AfterSalesService :

• Fire foam fire extinguisher provided by the manufacturer