35 ton light body 13m 6+1 oil cylinder rollover dump truck 11m light semi-trailer overturned

Description :

　　In fact, the so-called standard vehicle rollover, as the name suggests, evolved from the standard semi-trailer by adding a hydraulic cylinder lifting system and a tilting attachment structure. Nowadays, in the environment of standard load transportation, when the length is 13 meters, the matching number of lifting cylinders is generally six plus one displacement cylinder. At 8.5 meters, there are generally four lifting cylinders and one displacement cylinder. Lift cylinders are generally divided into two types based on cylinder diameter: 110 # and 130 #, while shift cylinders are mostly 130 #. Side flip self dumping integrated left and right, the opening style of the box board is generally suspended on both sides, and the lifting cylinder is located in the center of the tilting attachment frame. When tilting to the left, it is necessary to open the limit pin on the right side and the lifting door switch on the left side in advance; When tilting to the right, it is necessary to open the limit pin on the left and the hanging door switch on the right in advance. This type of structure has a flexible unloading method, but the lifting point is closer to the support point, which causes relatively greater damage to the oil cylinder during lifting. In addition, it is necessary to correctly open the corresponding limit switch and box door lock in advance during operation. Otherwise, there is a risk of overturning during unloading. According to the current announcement length, standard vehicle rollover can generally be divided into: 13 meters, 12.5 meters, 12 meters, 11.5 meters, 11 meters, 10.5 meters, and AAA short can reach 10 meters. The width is only available in two options: 2.5 meters and 2.55 meters, with the latter being the most commonly chosen. The height of the box board is only 0.6 meters.

　　The new standard box dump trailer looks similar in height to a standard semi-trailer in appearance, but the difference is that the carrying surface of the standard trailer when overturned is about 1.65 meters above the ground, which is about 10 centimeters higher than the carrying surface of a regular straight beam standard trailer. There is also an additional inclined displacement cylinder at the rear of the standard trailer. The style of the box board is similar, but the opening method is different. According to different unloading methods, standard vehicle rollover can generally be divided into three types: left side rollover, right side rollover, and integrated left and right rollover, which should be adapted to different unloading scenarios and personal operating habits. On the left side, the opening style of the box board is generally suspended on one side and opened downwards on the other side. The lifting cylinder is about 2 centimeters to the right of the tilting attachment frame center, and the opposite is true for the right side flipping. The lifting point of this type of structure is far away from the support point, and the damage to the oil cylinder during lifting is relatively small. At present, there is a high demand for left-hand flipping styles in the market.

AfterSalesService :

• 11 meter light semi-trailer overturned