Manufacturer recommends 40 cubic meter powder material tanker truck and 45 cubic meter ash tank semi-trailer announcement brand

Description :

　　Bulk cement tanks are manufactured using advanced processing techniques through three-dimensional design. The chassis adopts specialized chassis from various manufacturers, with reliable performance. Suitable for the transportation and air pressure unloading of dry materials such as fly ash, cement, lime powder, and ore powder with particle diameters not exceeding 0.1mm. When the vertical height of the unloading reaches 15m, the horizontal conveying distance can also reach 5m. The semi-trailer powder material transport vehicle uses its own engine power to drive the on-board air compressor through the power take-off, and sends compressed air through the pipeline into the air chamber at the bottom of the sealed tank, so that the cement on the fluidized bed is suspended in a fluid state. When the pressure inside the tank reaches the rated value, the discharge butterfly valve is opened, and the fluidized cement flows through the pipeline for transportation. Made with advanced domestic technology, the design is innovative, sturdy and durable. The airbag type has a large load-bearing capacity, fast unloading speed, and small residual amount. The integrated tank has the characteristics of high overall strength, good rigidity, good pressure resistance, and good performance. Shandong Liangshan bulk cement tanker truck, tank semi-trailer with a tank structure for cargo loading. Mainly used for transporting liquids, bulk materials, and bulk cement.

　　It uses a screw conveyor installed on a car to unload ash, adjusts the height of the screw conveyor, and can unload cement to different heights while reducing cement flying. However, the ash unloading mechanism is prone to wear due to direct pushing of cement. Pneumatic ash unloading vehicles: appeared in the 1960s and are relatively easy to use. At present, the carrying capacity of this type of car has reached nearly a hundred tons. Its cargo compartment is a can type container, standing or lying diagonally on the car frame. The horizontal tank has a lower center of gravity, making it stable for car driving and widely used. The tank body can be welded with steel or aluminum plates, or made of fiberglass. The upper part of the tank has one or more ash filling ports along the length of the tank, making it easy to fill the entire tank.

　　Shandong Liangshan Hongsheng Ruixin Trailer Manufacturing Co., Ltd. is a semi-trailer with a tank structure for the cargo area. Mainly used for transporting liquids, bulk materials, and bulk cement. The 30-50 cubic material tanker series includes oil tank trucks, concrete mixer trucks, powder and bulk cement trucks, water supply trucks, etc. Bulk cement tanker, bulk cement truck, also known as cement tanker, powder material truck. A vehicle with enclosed cargo compartments and automatic unloading devices used for transporting bulk cement. Mainly used for cement plants, cement warehouses, and large construction sites, it can save a lot of packaging materials and loading and unloading labor. There are three types of bulk cement trucks, introduction: gravity ash unloading truck: the early appearing bulk cement truck. It is made by adding a sealed cargo compartment roof to a regular dump truck. When unloading, the cargo compartment tilts up and the cement is automatically unloaded by gravity. This method of unloading ash can only unload cement to a position lower than the carriage, causing the cement to fly and a large area of material to fall during unloading. Mechanical ash unloading vehicles: began to be used in the 1950s.

　　The ash loading port of bulk cement tankers can also serve as an entrance and exit for maintenance personnel. The bottom of the tank is equipped with a cement fluidization device. The car is equipped with an air compressor for unloading ash. When unloading ash, compressed air is sent into the tank from the bottom, and is divided into fine streams by the permeable layer of the cement fluidization device. The cement is evenly filled into the air cement mixture, and the cement is discharged along the discharge pipe under the pressure difference inside and outside the container. The pneumatic ash unloading method has the advantages of fast ash unloading, less dust flying, and the ability to unload at any height and distance using flexible long discharge pipes. It can also be used for outdoor operations in windy and rainy weather. Shandong Ruixin Special Manufacturing Co., Ltd. has been producing light and small bulk cement tanks, 10 cubic bulk cement tank trucks, 20 cubic semi-trailer bulk cement tank trucks, 30 cubic bulk cement tank truck prices, 35 cubic bulk cement tank trucks, 38 cubic light bulk cement tank trucks, 40 cubic bulk cement tank truck prices, 48 cubic bulk cement tank truck prices, 56 cubic bulk cement tank truck prices, heavy-duty 70 cubic bulk cement tank truck manufacturing plant, 75 cubic bulk cement tank truck prices, export 80 cubic bulk cement tank truck prices, 85 cubic bulk cement tank truck prices, 100 cubic bulk cement tank truck prices, and Liaoning 35 cubic bulk cement tank truck prices in the first ten days

AfterSalesService :

• 40 cubic meter powder material tanker truck