Introduction to the configuration and price of a 40 ton standard box rollover dump truck

Description :

　　With the cancellation of the notice for the integrated side dumping semi-trailer with a length of 11 meters and a box board height of 1.5 meters, the transportation of flatbed semi-trailer with boxes is considered a modification by the traffic management department. However, the actual load capacity of the standard rear dumping semi-trailer with a box height of 0.6 meters is too low, so the demand for standard vehicle side dumping has increased sharply in recent times, and its position in the current dump truck industry is becoming increasingly important. According to the current announcement length, standard vehicle rollover can generally be divided into: 13 meters, 12.5 meters, 12 meters, 11.5 meters, 11 meters, 10.5 meters, and AAA short can reach 10 meters. The width is only available in two options: 2.5 meters and 2.55 meters, with the latter being the most commonly chosen. The height of the box board is only 0.6 meters.

　　In fact, the so-called standard vehicle rollover, as the name suggests, evolved from the standard semi-trailer by adding a hydraulic cylinder lifting system and a tilting attachment structure. Nowadays, in the environment of standard load transportation, when the length is 13 meters, the matching number of lifting cylinders is generally six plus one displacement cylinder. At 8.5 meters, there are generally four lifting cylinders and one displacement cylinder. Lift cylinders are generally divided into two types based on cylinder diameter: 110 # and 130 #, while shift cylinders are mostly 130 #.

　　From the appearance, it looks similar in height to a standard semi-trailer, but the difference is that the bearing surface of the standard trailer when overturned is about 1.65 meters above the ground, which is about 10 centimeters higher than the bearing surface of a regular straight beam standard trailer. There is also an additional inclined displacement cylinder at the rear of the standard trailer. The style of the box board is similar, but the opening method is different.

　　According to different unloading methods, standard vehicle rollover can generally be divided into three types: left side rollover, right side rollover, and integrated left and right rollover, which should be adapted to different unloading scenarios and personal operating habits. On the left side, the opening style of the box board is generally suspended on one side and opened downwards on the other side. The lifting cylinder is about 2 centimeters to the right of the tilting attachment frame center, and the opposite is true for the right side flipping. The lifting point of this type of structure is far away from the support point, and the damage to the oil cylinder during lifting is relatively small. At present, there is a high demand for left-hand flipping styles in the market.

　　Left and right integrated, the opening style of the box board is generally suspended on both sides, and the lifting cylinder is located in the center of the tilting attachment frame. When tilting to the left, it is necessary to open the limit pin on the right and the lifting door switch on the left in advance; When tilting to the right, it is necessary to open the limit pin on the left and the hanging door switch on the right in advance. This type of structure has a flexible unloading method, but the lifting point is closer to the support point, which causes relatively greater damage to the oil cylinder during lifting. In addition, it is necessary to correctly open the corresponding limit switch and box door lock in advance during operation. Otherwise, there is a risk of overturning during unloading. If there are height restrictions during the transportation route, it is necessary to communicate with the manufacturer in advance when customizing. Currently, the overall height available for this vehicle is generally between 2.7 meters and 3.1 meters, and can be customized according to the corresponding height requirements and announcement parameters to avoid unnecessary trouble in the later stage. At present, the country's vigorous efforts to control overloading have been effective. In order to create a safe and equal transportation environment, various types of illegal vehicles are being cleared out of the transportation market. It is believed that in the near future, the main force of transportation will still be standard vehicles that meet the requirements. Among self dumping vehicles, the standard vehicle rollover, which was once overlooked due to the prevalence of other overloaded vehicles, has gradually become a new favorite in the industry. With its own advantages, it will definitely be able to show its skills in self dumping cargo transportation in the future. If the total weight of the vehicle and cargo exceeds the limit standards specified in Article 3, Items 4 to 8 of these regulations, but does not exceed A0 kilograms, a warning shall be given; For those exceeding A0 kilograms, a fine of 500 yuan will be imposed for each excess of A0 kilograms, and the maximum fine shall not exceed 30000 yuan. 5. If there are multiple illegal acts listed in the preceding paragraph, the corresponding fines for the illegal acts shall be accumulated, but the accumulated fines shall not exceed 30000 yuan.

AfterSalesService :

• 40 ton standard box overturned dump truck