Fruit flavored soda production line equipment 4000 bottles per hour glass bottle carbonated beverage equipment

Description :

One What is carbonated beverage:

　　When it comes to carbonated drinks, people will think of cold cola, Sprite and other soda drinks in the scorching summer, as well as new carbonated drinks such as fruit beer and soda water. So what is a scientifically defined carbonated beverage? Carbonated beverage (soda) products refer to beverages that are filled with carbon dioxide gas under certain conditions. Carbonated beverages mainly consist of acidic substances such as carbonated water and citric acid, white sugar, spices, and some contain artificial colors. Except for carbohydrates that can provide energy to the human body, carbonated drinks that are filled with air contain almost no nutrients. Generally, there are cola, Sprite, and soda. Excessive drinking is harmful to the body.

II The Development History of Carbonated Beverages in China:

　　At the beginning of this century, with the economic aggression of imperialism against our country, soda equipment and production technology entered our country, and small soda factories were established in major coastal cities such as Tianjin Shanhaiguan, Shanghai Zhengguanghe, Guangzhou Asia, Shenyang Bawangsi, and Qingdao. However, the production capacity was very low, such as the Shenyang Bawangsi soda factory that was put into operation in 1921 with an annual output of only 150 tons of soda. Afterwards, some small soda factories were built successively in Wuhan, Chongqing and other places.

　　Before the liberation, the total output of beverages in China was only 5000 tons. After 1980, carbonated beverages developed rapidly. In 1995, the total production of carbonated beverages reached 3 million tons, accounting for about 50% of China's total soft drink production that year. In 1998, it reached 4.927 million tons, accounting for about 45% of China's total soft drink production that year. Although the proportion of carbonated beverages in China's beverage industry is continuously decreasing, their unique cooling and thirst quenching effects cannot be replaced by other beverages, including natural fruit and vegetable juice drinks. Therefore, their total production is still increasing.

III Classification of carbonated beverage production lines in terms of process:

　　1. One time filling method

　　Also known as pre adjustment filling method, finished product filling method, or pre mixing method. Pump the seasoning syrup and water into a carbonated beverage mixer in a certain proportion beforehand, mix them quantitatively, cool them down, and then carbonize the mixture before filling it into a container.

　　Drinking water → Water treatment → Cooling → Gas water mixing ← Carbon dioxide

　　↓

　　Syrup → Mixing → Filling → Sealing → Inspection → Product

　　↑

　　Container → Cleaning → Inspection

　　2. Secondary filling method

　　Also known as the current filling method, pre syrup method, or post mixing method. First, pour a certain amount of seasoning syrup into the container, then add carbonated water to the specified amount, seal it, and mix evenly.

　　Drinking water → Water treatment → Cooling → Gas water mixing ← Carbon dioxide

　　↓

　　Syrup → Mixing → Cooling → Grouting → Water Filling → Sealing → Mixing → Inspection → Product

　　↑

　　Container → Cleaning → Inspection

　　Composition of equipment for carbonated beverage production line:

　　The material system, bottle blowing and filling system, blending and mixing system, and filling and packaging system are composed of four parts.

4 Production and processing technology of carbonated beverages containing steam:

　　Blowing machine → Sorting machine → Mixing system → Beverage mixer → Filling equipment → Warm bottle spraying equipment → Packaging equipment → Finished products.

Five Detailed explanation of the functions of the carbonated beverage production line equipment:

　　1. Material and equipment: The output is 2-50 tons/hour, and it needs to be matched with a filling production line;

　　2. Bottle blowing machine: Matching with the filling production line, fully automatic/semi-automatic bottle blowing machines can be used depending on the situation;

　　3. Bottle sorting machine: If the output is small, manual bottle sorting can be used to save the cost of purchasing a bottle sorting machine. If the output is greater than 4000 bottles/hour, bottle sorting and filling can be considered to reduce labor expenses;

　　4. Filling host: matched according to the actual production capacity of the customer, with a production range of 3000-24000 bottles/hour;

　　5. Warm bottle spray equipment: customized according to needs;

　　6. Labeling machine/labeling machine: according to the actual requirements of the customer;

　　7. Inkjet printer: Ink/laser inkjet printer, according to customer's actual requirements;

　　8. Film wrapping machine/cardboard box sealing machine: according to the actual requirements of the customer;

VI The filling process of carbonated beverage fruit flavored soda:

　　1. Filling system:

　　A combination system of syrup, carbonated water, and capping operations.

　　The secondary filling system consists of a grouting machine, a water filling machine, and a capping machine.

　　In the process of adding syrup to a filling system, the proportioner is placed before the mixer. The filling system consists of a filling machine and a capping machine driven by a power mechanism.

　　Filling machine: differential pressure type, isobaric type, negative pressure type.

　　Sealing machine: filling production line.

　　2. Quality requirements for filling:

　　Achieve the expected level of carbonation and ensure the accurate ratio of syrup to water

　　Ensure reasonable and consistent filling height

　　The top gap of the container should maintain a low air volume

　　Sealed tightly and effectively

　　Maintain product stability (instability caused by excessive carbonation, impurities, air, high filling temperature, or large temperature differences)

7 Kexin:

　　If you are exploring a new project, Kexin provides you with a comprehensive solution, including equipment configuration, process flow, product formula, workshop layout, on-site installation, etc.

　　If your project is ongoing and lacks on-site installation and commissioning, Kexin has a dedicated construction team to carry out commissioning and sanitary welding between equipment and pipelines for you.

　　3. If there are quality problems with the products you are producing, Kexin provides quality diagnosis, diagnoses equipment configuration, process flow, etc., and provides effective solutions to improve product quality and reduce production costs for you.

8 Business process:

　　1. Preliminary evaluation: Conduct a preliminary evaluation of the project based on your production goals, product characteristics, and marketing plan.

　　2. Parameter design: Analyze and design the technical parameters of your engineering project, including process, mechanical, and electrical control design.

　　3. Plan determination: Based on your factory layout, discuss and draw a production line layout plan to establish the final project implementation plan.

　　4. Manufacturing monitoring: Develop and monitor the manufacturing progress of your project until the overall project passes performance testing and acceptance.

　　5. Personnel training: Improve the technical level of your production engineering personnel and train them on the operation skills of the entire line and related equipment.

　　6. After sales: Kexin adheres to the concept of putting customer interests at the center, providing you with fast and high-speed engineering and after-sales services.

Nine 6 reasons to choose Kexin:

　　1. Kexin Company has sales, engineering, and after-sales departments, all of which are dedicated to serving you;

　　What we are fighting for is not price, but quality and friendliness;

　　3. Our salespeople and engineers will patiently listen to your requirements and desired results, and tailor materials for you;

　　4. Our after-sales colleagues will process your order, usage, and actual production;

　　20 years of industry experience,;

　　6. On site visits to factories and offices.

Ten Projects that Wenzhou Kexin Light Industry Machinery Co., Ltd. can undertake:

　　1. Complete production line for hot filled beverages ranging from 2000 bottles to 36000 bottles per hour

　　2. Production line for 2000 bottles per hour -36000 bottles of mineral water and purified water

　　3. 2000 bottles per hour -36000 bottles of carbonated beverage production line

　　4. Production line for drinking water in 3-gallon and 5-gallon barrels, ranging from 100 to 1500 barrels per hour

　　5. 2000 cans per hour -36000 cans of canned beverage production line (plant protein beverage, tea beverage, functional health beverage, canned beer production line)

　　6. Production line for 2000-36000 bottles of dairy beverages per hour (milk production line, yogurt production line, fresh milk production line, pasteurized milk production line)

　　7. 2000 bottles per hour -36000 bottles carbonated beverage production line (glass bottle carbonated beverage production line, PET carbonated beverage production line, soda can carbonated beverage production line)

　　8. 2000 bottles per hour -36000 bottles of alcohol production line (beer production line (glass bottles, cans), Baijiu production line, rice wine production line, medicinal wine production line, wine production line, health wine production line, etc.)

　　9. Various water treatment equipment RO reverse osmosis UF ultrafiltration equipment

　　10. Various beverage equipment such as mixing tanks, hot and cold tanks, sandwich pots, fermentation tanks, mixing tanks, bottle filling and sealing machines, heat shrink packaging machines, labeling machines, sterilization pots, sterilization machines, etc.

　　11. Plate and tube UHT devices, CIP systems.

　　12. Turnkey project for the entire factory.

　　Wenzhou Kexin Light Industry Machinery Co., Ltd. is a specialized enterprise engaged in the design and manufacturing of fluid equipment and accessories, with business scope covering beverage engineering, alcohol engineering, food engineering, dairy engineering, water treatment and other engineering fields. The main products include: beverage filling production line, purified water production equipment, barreled water filling production line, pop can filling production line, vegetable protein beverage production line, (containing gas) carbonated beverage production line, vitamin functional beverage production line, fruit juice beverage production equipment, red wine production line, Baijiu production line, etc. (fruit and vegetable drinks, Babao Congee, edible oil, condiments, bee products, cosmetics and other full sets of production line equipment) various beverage mechanical filling equipment, packaging equipment and supporting products to meet the needs of various types of customers. We also provide process design, plant construction guidance, machinery manufacturing, installation and commissioning, after-sales, technical training, beverage technical formula, etc. Key engineering.

AfterSalesService :

• Fruit flavored soda production line equipment