Plastic Ball Ring Polypropylene Plastic Ball Ring Filler Diameter 25mm PP Ball Ring Pingxiang Qunxing
Category:
chemical industry/Mass transfer equipment/Filler/Filler
Model:
PP Ball Ring
Brand:
Stars
model:
PP Ball Ring
type:
Ball ring packing
Loading method:
bulk
Packing material:
plastic
specific surface area:
two hundred and thirteen
Processing & Customization:
yes
content:
ninety
void ratio:
ninety-one
Packing factor:
one hundred and eighty-five
Overall dimensions:
25*25*1.2mm
bulk density:
seventy
Implement quality standards:
National Standard
weight:
one point two
Place of Origin:
Pingxiang
manufacturer:
Pingxiang Qunxing
Retail Price
2,000.00USD
重量
kg
- Product Description
-
model PP Ball Ring
type Ball ring packing
Loading method bulk
Packing material plastic
specific surface area two hundred and thirteen
Processing & Customization yes
content ninety
void ratio ninety-one
Packing factor one hundred and eighty-five
Overall dimensions 25*25*1.2mm
bulk density seventy
Implement quality standards National Standard
weight one point two
Place of Origin Pingxiang
manufacturer Pingxiang Qunxing
Description :
Product Overview
Ball ring packing has the advantages of high flux, low resistance, high separation efficiency, and high operational flexibility. Under the same pressure reduction, the processing capacity can be more than 50% larger than that of Rascal ring. At the same processing capacity, pressure reduction can be reduced by half, and mass transfer efficiency can be improved by about 20%. Compared with Raschig ring, this type of packing has the characteristics of high production capacity, low resistance, and high operational flexibility. In general, it can be processed 50% -99% higher than Raschig ring under the same pressure drop, and 50% -70% lower than Raschig ring under the same pressure drop. The tower height can also be reduced. Using Ball ring can save 20% -40% of packing volume compared to Raschig ring.
Product Introduction
Polypropylene Bao'er ring packing is a type of perforated ring packing with equal height and diameter. Each layer of the window has 5 tongue blades, and each tongue blade is bent inward towards the center of the ring. The positions of the upper and lower layers of window holes are opposite and staggered. Generally, the opening area accounts for about 30% of the total area of the ring wall. It has the characteristics of high porosity, low pressure drop and mass transfer unit height, high flooding point, sufficient gas-liquid contact, low specific gravity, and high mass transfer efficiency. This structure improves the distribution of gas-liquid and fully utilizes the inner surface of the ring, allowing gases and liquids inside the packed tower to freely pass through the window.
Product Features
1. High air velocity, multiple blades, and low resistance.
2. With a larger specific surface area, it can fully solve the problem of gas-liquid exchange.
3. This product has the characteristics of high production capacity, low resistance, and high operational flexibility.
Product Application:
Suitable for use as contact packing in carbon dioxide degassing towers, ozone contact reaction towers, and other reaction towers.
AfterSalesService :
Key words:- Pall ring
More Products
