Pingxiang Qunxing Ceramic Ladder Ring Packing Drying Absorption Tower Ceramic Packing Manufacturer
Category:
chemical industry/Mass transfer equipment/Filler/Filler
Model:
cascade ring
Brand:
Stars
model:
cascade ring
type:
Stair ring
Loading method:
bulk
Packing material:
ceramics
specific surface area:
two hundred and ten
Processing & Customization:
yes
content:
ninety
void ratio:
seventy-three
Packing factor:
five hundred and forty
Overall dimensions:
25*15*3mm
bulk density:
two thousand three hundred and fifty
Implement quality standards:
National Standard
Place of Origin:
Pingxiang
manufacturer:
Pingxiang Qunxing
Retail Price
1,000.00USD
重量
kg
- Product Description
-
model cascade ring
type Stair ring
Loading method bulk
Packing material ceramics
specific surface area two hundred and ten
Processing & Customization yes
content ninety
void ratio seventy-three
Packing factor five hundred and forty
Overall dimensions 25*15*3mm
bulk density two thousand three hundred and fifty
Implement quality standards National Standard
Place of Origin Pingxiang
manufacturer Pingxiang Qunxing
Description :
Product Introduction
Due to the addition of flanged edges on the side of the ceramic stepped ring, not only can the mechanical strength of the packing ring be increased, but also the symmetry of the packing structure is disrupted, thereby increasing the chances of orientation during packing placement. Due to the influence of flanging, the contact between the packing rings during packing changes from linear contact to point contact. In this way, the ceramic stepped ring not only increases the gaps between the packing particles, reducing the resistance of gas passing through the packing layer, but also serves as the convergence and dispersion points for the liquid flowing along the packing surface, thereby promoting the surface renewal of the liquid film and improving the mass transfer efficiency of the packing.
Product Application:
Drying towers, absorption towers, cooling towers, washing towers, regeneration towers, etc. that can be used in industries such as chemical, metallurgical, gas, oxygen production, etc.
Product Overview:
Ceramic stepped ring packing is a new type of high-efficiency annular perforated packing, with a height of about half the diameter. One side of the ring has a conical flange, and four high holes are evenly distributed on the ring wall. The ring is equipped with a meter shaped inner rib. The unique structural design makes the packing mainly point contact when stacked, which not only increases the porosity of the packing, reduces air flow resistance, but also greatly improves the gas-liquid distribution performance in the packing layer.
The ceramic stepped ring filler absorbs the characteristics of short Rascal rings and also changes the habit of the filler's ring height and diameter being equal, reducing the height of the ring, thinning the thickness of the material, and adding flanges at the side ends of the ring.
The performance of ceramic step rings has been further improved compared to Ball rings. Generally, the flux of stepped ring packing can be increased by 10-20% and the pressure can be reduced by 30-40% compared to Bauer ring packing. The separation efficiency varies depending on the specific process. Especially suitable for extraction and fractionation processes, the stepped ring is still a commonly used packing material both domestically and internationally.
AfterSalesService :
Key words:- cascade ring
More Products
