Ceramic filter tube filter Pingxiang Qunxing
Category:
chemical industry/Mass transfer equipment/Filler/Filler
Model:
filter tube
Brand:
Stars
model:
filter tube
Loading method:
tidy up
Packing material:
ceramics
Processing & Customization:
yes
content:
ninety
void ratio:
30-43
Implement quality standards:
National Standard
weight:
one thousand four hundred and eighty
Place of Origin:
Pingxiang
manufacturer:
Pingxiang Qunxing
Retail Price
100.00USD
重量
kg
- Product Description
-
model filter tube
Loading method tidy up
Packing material ceramics
Processing & Customization yes
content ninety
void ratio 30-43
Implement quality standards National Standard
weight one thousand four hundred and eighty
Place of Origin Pingxiang
manufacturer Pingxiang Qunxing
Description :
Product Introduction
Micro porous ceramic filter tubes have numerous micro pores with evenly distributed network state, and the pore size is slender and curved, with good permeability. They have the characteristics of capillaries, allowing solid particles to form an arch bridge shape at the micro pore diameter, with little impact on the filtration rate; The product has high temperature resistance, corrosion resistance, no deformation, easy cleaning and regeneration, and a long service life,,; The regeneration of microporous ceramic filter tubes is simple, usually backwashing once every three months. After removing the sediment, backwashing with water or compressed air can restore the original state and continue to be used. The structural shape of microporous ceramic filter tubes belongs to cylindrical shape, and the tube wall is composed of countless aluminum silicate ceramic particles of different specifications. When they are assembled, they form free gaps ranging from tens of micrometers to 0.1 micrometers in different rules. After adding dissolution binders and sintering, microporous filter ceramic tubes with high strength, many but small gaps, corrosion resistance, and high temperature resistance are obtained.
Product performance:
The microporous ceramic membrane filter tube consists of a microporous ceramic carrier substrate and a 1-100 μ m microporous ceramic membrane formed on its surface. Aluminum silicate ceramic, quartz ceramic, mullite ceramic, alumina ceramic, silicon carbide ceramic, brown corundum ceramic, corundum ceramic, etc. can be used to prepare microporous ceramic membrane filter tube substrates, and alumina microporous membrane can be coated on the ceramic membrane filter tube. By using different preparation processes, the micropore size can be reduced to a small pore size of 40A to 200 μ mm. The product has a gradient changing microporous structure, effectively overcoming the problems of large pressure loss and low separation efficiency in porous ceramics
AfterSalesService :
Key words:- Ceramic filter tube
More Products
