Pingxiang Qunxing Ceramic Filter Tube Water Treatment Filter

Description :

　　Product Introduction

　　Micro porous ceramic filter tubes are composed of numerous uniform and numerous micro pores. When fluid passes through these tiny pores, suspended matter, colloidal particles, and large organic molecules are trapped on the surface of the filter medium. The fluid passes through microporous channels to produce various physical effects, achieving mechanical sieve filtration purification or diffusion, fluidization, and other effects.

　　Product Features:

　　Micro porous ceramic filter tubes have the characteristics of corrosion resistance, high temperature resistance, high mechanical strength, no harmful substances leaching, no secondary pollution, no deformation of micro pores under fluid pressure, easy cleaning and regeneration, long service life, and can replace cotton cloth, silk fabric, plastic, metal mesh, asbestos fluff, etc

　　Product Application:

　　Micro porous ceramic filter tubes can be widely used in the treatment of environmental protection "three wastes" in industrial enterprises such as petroleum, chemical, metallurgical, thermoelectric, cement, medicine, and papermaking, including solid-liquid separation, gas-liquid separation, powder transportation, oil-water separation, brewing separation, air filtration, circulating water filtration, etc. They are particularly suitable for filtering boiler dust removal wastewater and slag flushing water.

　　Product Features:

　　The new process of sedimentation and microporous ceramic filtration is innovative in design, simple in construction, economical and practical. More than 150 small and medium-sized power plant boilers and industrial boilers have been treated using this process. The removal rate of dust removal and slag flushing wastewater and suspended solids in domestic boilers has reached 91-97% or more, and the COD removal rate has reached 89-95% or more. The concentration of suspended solids at the outlet is generally around 10-50mg, and the water quality is clear and transparent, all of which meet the first level discharge standard, achieving closed-loop recycling and zero discharge.

Product Introduction

　　Micro porous ceramic filter tubes have numerous micro pores with evenly distributed network state, and the pore size is slender and curved, with good permeability. They have the characteristics of capillaries, allowing solid particles to form an arch bridge shape at the micro pore diameter, with little impact on the filtration rate; The product has high temperature resistance, corrosion resistance, no deformation, easy cleaning and regeneration, and a long service life,,; The regeneration of microporous ceramic filter tubes is simple, usually backwashing once every three months. After removing the sediment, backwashing with water or compressed air can restore the original state and continue to be used. The structural shape of microporous ceramic filter tubes belongs to cylindrical shape, and the tube wall is composed of countless aluminum silicate ceramic particles of different specifications. When they are assembled, they form free gaps ranging from tens of micrometers to 0.1 micrometers in different rules. After adding dissolution binders and sintering, microporous filter ceramic tubes with high strength, many but small gaps, corrosion resistance, and high temperature resistance are obtained.

　　Product performance:

　　The microporous ceramic membrane filter tube consists of a microporous ceramic carrier substrate and a 1-100 μ m microporous ceramic membrane formed on its surface. Aluminum silicate ceramic, quartz ceramic, mullite ceramic, alumina ceramic, silicon carbide ceramic, brown corundum ceramic, corundum ceramic, etc. can be used to prepare microporous ceramic membrane filter tube substrates, and alumina microporous membrane can be coated on the ceramic membrane filter tube. By using different preparation processes, the micropore size can be reduced to a small pore size of 40A to 200 μ mm. The product has a gradient changing microporous structure, effectively overcoming the problems of large pressure loss and low separation efficiency in porous ceramics

　　Product Features:

　　Micro porous ceramic membrane filter tube is another form of micro porous ceramic filter medium. Micro porous ceramic filter medium is composed of aggregates (quartz, alumina, corundum, brown corundum, silicon carbide, etc.) mixed with a certain amount of binder, pore forming agent, and corrosion inhibitor. After coating and sintering at high temperature, it is formed into various shapes and specifications. After sintering into ceramics, many bridge shaped open micro porous channels with uniform size distribution and interconnected are formed in its body, which are called micro porous ceramics. When fluid passes through these microchannels, suspended impurities, gelatinous particles, bacteria, and large organic molecules in the raw water are filtered and intercepted. The fluid produces various physical effects inside the outer surface of the microporous channels, achieving mechanical screening, purification or diffusion, fluidization, adsorption and interception effects.

Scope of application：

　　Micro porous ceramic filter tubes are mainly used for filtering acidic gases, air purification, and sewage treatment in refining, chemical, synthetic rubber, textile, pharmaceutical, and food processing industries, replacing polymer PP liquids, filters, filter cloth, quartz sand, etc

AfterSalesService :

• Ceramic filter tube