Pingxiang Qunxing Stainless Steel Raschig Ring Metal Bulk Packing 304 Metal Raschig Ring Packing

Description :

　　one）Product Description:

　　Produced by the companyMetal Rascal RingIt was developed by F. Rasching in 1914. It is the earliest invented loose packing material with a fixed geometric shape. Its appearance is simple, and its height is equal to its diameter. Large sized Raschig rings (over 100MM) are generally filled in a neat manner, while Raschig rings smaller than 75mm are generally filled in a disorderly manner. Metal Raschig rings are widely used in many fields, but their main application is as catalyst supports.

　　Produced by the companyMetal Rascal RingThere are various materials for fillers, such as carbon steel, stainless steel 304, 304L, 410, 316, 316L, etc., to choose from.

　　2)Product Performance Introduction:

　　Metals produced by the companyRaschig ringIts characteristics are: the outer diameter and height of the packing ring are equal, the structure is simple, and it is inexpensive, but there are points such as uneven liquid distribution and severe wall flow channel phenomenon. Nowadays, corrosion-resistant ceramics are commonly used in the acid making industry. The main function is to provide sufficient contact surface between the gas and liquid phases.

　　3)Product Technical Parameters:

　　4）Product Application:

　　Drying towers, absorption towers, washing towers, regeneration towers, etc. that can be used in industries such as chemical, metallurgical, gas oxygen production, etc

　　5）Product principle:

　　Produced by the companyMetal Rascal RingAfter improvement, fillers such as Bauer rings, stepped rings, and conjugated rings have been developed, which have improved the mass transfer surface, increased mass transfer flux, and reduced mass transfer resistance. Saddle shaped packing is an open packing material resembling a saddle shape, which is not prone to forming a large number of locally uneven areas inside the tower. It has a high porosity and low airflow resistance, making it a high-performance industrial packing material. Saddle ring packing combines the advantages of good liquid redistribution performance of saddle shaped packing and high flux of annular packing, and is currently a high-performance bulk packing. The corrugated packing is composed of many layers of corrugated thin plates with the same height but different lengths. The corrugated thin plates are arranged in a circular cake shape, and each cake is vertically stacked in the tower. The corrugations are inclined at a 45 ° angle to the horizontal direction, and adjacent cakes are stacked in reverse to form a 90 ° staggered pattern. This type of filler belongs to the integral masonry structure, with low fluid resistance, high flux, and high separation efficiency in the Rasi ring. However, it is not suitable for materials with sediment, easy coking, and high viscosity, and it is difficult to load, unload, and clean, resulting in high cost. Using metal wire mesh to manufacture fillers undoubtedly increases the specific surface area of the fillers and reduces airflow resistance, thereby improving mass transfer efficiency. This type of packing includes mesh rings, saddle shaped mesh, corrugated mesh, triangular coils, etc. When designing a packed tower, the fluid dynamics performance of the tower should be considered first, which mainly includes the pressure drop of gas passing through the packing layer, the gas flooding velocity, the liquid holding capacity (the volume of liquid held per unit volume of packing), and the gas-liquid distribution.

　　Metal Rascal Ring FillerPackaging method: woven bag;

　　Metal Rascal Ring FillerTransportation method: truck transportation;

　　Material: Ceramic/PP/PVC/CPVC/PVDF/PTFE, etc;

　　Material: 304/304L/316/316L/duplex steel/titanium, etc;

AfterSalesService :

• Stainless steel pull ring